Hmmmmm....My new bike's theme is coming to mind...O.K., I'm putting down my Amstel....
2001/2002 Works/Flo-Green frame/Bare Sub-frame/Bare swing-arm (Well, R.K., P.C. and Renthal graphics of-course) Silver frames are for Suzukis!)
Frame prepped, welded and painted in-house/KDX Hoops.
Black 250 Rear.
Black Seat Cover/'89 KX125 "Low" seat foam.
Black Tank (Moto Version).
Green (Maybe...yes, I'm serious here, Flo-Green) Shrouds.
Green (Matching the green of choice on shrouds) '04 Front fender.
Black Side Panels w/ White back-grounds (Team Green/Pitbull-Racing Logo'd, of-course!)
White Front Plate (Moto) with matching backgrounds.
Tank/Shroud Graphics with U.S. Flag (Fox, CDG, Team Green Logos)...kinda like MXd'nations...
Black Rims on Polished Black Hubs, Double Drawn Spokes w/ Al. Nipples. 19-21 or 18-20, depending on track (18-20 for Hang-Town...etc.)
FMF Fatty/P.C. "Moto" pipe Io-etched, Stock "Shortie Silencer"...with a "Different" material for the housing...heh, heh, heh...
Braasch P.C. Motor w/ Carbon reeds.
105 Plug.
Carbon Ignition Cover.
3 speed/3-up.
Welded shut oil widow.
Regular Renthals (RM or CR low) on BRP Top-Set/Works Mag-Lowers.
Al. and Ti fasteners where applicable (All but pivot, linkage).
P.C. Dog-Bones.
P.C. "Works" Suspension/'04 SR250 Forks (One-Piece uppers).
TI Pegs.
Carbon Shifter & Brake Lever Arms w/Ti tips.
Removable Clutch Cover-KMC-US.
Fast-adjust works perch.
Stock or Terry cables.
Stock Grips.
Al. Throttle tube w/Bearing in end.
CDG Carbon Motor Mounts, Glide, Silencer Mount and Housing(With F.I.M. tip), Roost Gaurds, Chain Guide, Rear-Caliper Mount and Air-Box.
Light-Weight Bridgestones...they can be had...kinda...
Std Bridgestone tubes.
Galfer Wave floating rotors on CDG Carbon Carriers/ Green pads.
Galfer lines with "Round the inside" front and Carbon reinforcement front and rear.
One piece SR rear master.
Nissin Mag. front master.
Rubber Grip clutch lever.
Works shortie/polished for dry/Rubber grip for wet front lever.
Works banjos all around (Really pretty!)
Al./Safety Wired Drain and fill/oil.
Prepped and welded radiators.
Blue-silicone hoses f/g wrapped w/ Al. Aircraft clamps.
R.K. Chain.
47 Al. Rear on Carbon Carrier.
15 Front/Renthal/Ti-Nut/Safety wired.
Target Weight: <200# w/o gas.
Think I'm nuts?
I'm just thinking out loud...
Off-Road...
Add White Tank.(Colors stay the same other than tank).
Stock K5 rear fender if wet out.
Stock K5 front fender if wet out.
'91 KDX Rear if it's REALLLY wet out!
Same Frame w/KDX hoops.
Quick-fill w/ top-vent.
Add KDX Sub-frame w/ handles and O-Flow tank and plumb for gas.
'89 KX125 Seat Foam/Medium.
P.C. "Moto" pipe/Silicone hose at junction/Safety-wire/Kevlar Gaurd(CDG).
Stock Silencer/welded inhouse.
Skid inplace of Glide. Kevlar on Carbon (Had 'em since '97!)
Stainless spokes and Nipples on Excells, Gold Talons. 18-21 or 18-20.
BRP Top set/Stock Lower.
Scotts Damper.
Pro-Tapers/RM-low.
Pro-Taper "Bark-Busters".
Kevlar Deflectors/Big-ones on Cold morning starts!
Stock levers.
Fiberglass Reeds.
5-speed.
R.K. O-Ring.
15-42/43/45.
IMS Pro-Pegs.
Al./Ti fasteners only on Body-work/engine cases/seat/triples/rim-locks/radiators-No Pivots or Axles.
Extra-Loc-tite.
KDX Coil and Headlight/Plate Assy/White/Halogen Bulb.
LED Tail Light+1 Bright White LED.
'91 KDX lighting harness and switch.
Dunlop Deserts OR Kenda/IRC Combo if it tests well in Desert this spring.
Bridgestone H/D tubes-talc.
Teflon Tape w/silicone adhesive for rim liner.
Stock or IMS Shifter.
Stock Brake pedal w/lanyard.
NGK-Platinum.
Motorola Multi-channel with Toggle an bars.
Filter skins.
Target Weight: <250# no gas. Remember...we just added a lot of stuff!
Who knows? Some idiot just might build a couple of bikes like this...and he might even get Rick to ride it with him. Paul, too, if the timing's right!
Manny
Hey Paul, how's the Carbon Glide Tooling Project coming? (CGTP for CDG...it's Classified. We could tell ya; But,...)
