« previous next »
Pages: [1] 2   Go Down

Author Topic: BDI Law  (Read 6611 times)

0 Members and 1 Guest are viewing this topic.

Offline BDI

  • Hero Member
  • *****
  • Posts: 1,533
BDI Law
« on: January 06, 2011, 12:37:41 PM »
I want a new law past. There shall be no more then three different size bolts used to hold any engine together, small, medium and large. Also no one part can be held on by more then one size or style of bolt. I have been working on a dodge 2.7l engine, car manufacturers suck ass.
Logged
Smoke every cigarette like It's your last and ride like you stole something!!!

Offline DoldGuy

  • Hero Member
  • *****
  • Posts: 1,198
Re: BDI Law
« Reply #1 on: January 06, 2011, 12:45:47 PM »
Quote from: BDI on January 06, 2011, 12:37:41 PM
I want a new law past. There shall be no more then three different size bolts used to hold any engine together, small, medium and large. Also no one part can be held on by more then one size or style of bolt. I have been working on a dodge 2.7l engine, car manufacturers suck ass.

Also use only Metric or Standard, DO NOT use both on the same vehicle, bike, whatever!
Logged
Its Never too Late to Have a Happy Childhood!

Motorrad

  • Guest
Re: BDI Law
« Reply #2 on: January 06, 2011, 01:13:10 PM »
Quote from: DoldGuy on January 06, 2011, 12:45:47 PM
Quote from: BDI on January 06, 2011, 12:37:41 PM
I want a new law past. There shall be no more then three different size bolts used to hold any engine together, small, medium and large. Also no one part can be held on by more then one size or style of bolt. I have been working on a dodge 2.7l engine, car manufacturers suck ass.

Also use only Metric or Standard, DO NOT use both on the same vehicle, bike, whatever!

Bike im working on right now has standard and Whitworth interdispercied on it with no rhyme or reason...     Welcome to the last years in the Triumph factory.. (1974 triumph Trident)
Logged

Offline BDI

  • Hero Member
  • *****
  • Posts: 1,533
Re: BDI Law
« Reply #3 on: January 06, 2011, 01:59:19 PM »
Also they should standerdise three speical tools and everyone has to design thier parts around those tools. no more makeing s**t and then making tools so it can be worked on. we could go with three different sizes of each speical tool. I also agree with the metric and standard thing but I think we should do away with standard altogether. I bet UFO's have all metric fastners on them.
« Last Edit: January 06, 2011, 02:05:53 PM by BDI »
Logged
Smoke every cigarette like It's your last and ride like you stole something!!!

Motorrad

  • Guest
Re: BDI Law
« Reply #4 on: January 06, 2011, 02:31:15 PM »
Quote from: BDI on January 06, 2011, 01:59:19 PM
Also they should standerdise three speical tools and everyone has to design thier parts around those tools. no more makeing s**t and then making tools so it can be worked on. we could go with three different sizes of each speical tool. I also agree with the metric and standard thing but I think we should do away with standard altogether. I bet UFO's have all metric fastners on them.

This triumph uses torx on the Cylinder hold down bolts...

Not just any Torx...

Whitworth torx...

and you cant get a socket on em..

Do you know.. how hard it is... to find a WHITWORTH torx  crowsfoot?!   (impossible.. you make one. )
Logged

Offline BDI

  • Hero Member
  • *****
  • Posts: 1,533
Re: BDI Law
« Reply #5 on: January 07, 2011, 06:19:03 AM »
Quote from: Motorrad on January 06, 2011, 02:31:15 PM
Quote from: BDI on January 06, 2011, 01:59:19 PM
Also they should standerdise three speical tools and everyone has to design thier parts around those tools. no more makeing s**t and then making tools so it can be worked on. we could go with three different sizes of each speical tool. I also agree with the metric and standard thing but I think we should do away with standard altogether. I bet UFO's have all metric fastners on them.

This triumph uses torx on the Cylinder hold down bolts...

Not just any Torx...

Whitworth torx...

and you cant get a socket on em..

Do you know.. how hard it is... to find a WHITWORTH torx  crowsfoot?!   (impossible.. you make one. )
thats just rude.
Logged
Smoke every cigarette like It's your last and ride like you stole something!!!

Offline maddoggy

  • Hero Member
  • *****
  • Posts: 711
  • K5 @ ST. ANTHONY DUNES
Re: BDI Law
« Reply #6 on: January 08, 2011, 03:05:55 PM »
Quote from: BDI on January 06, 2011, 01:59:19 PM
Also they should standerdise three speical tools and everyone has to design thier parts around those tools. no more makeing s**t and then making tools so it can be worked on. we could go with three different sizes of each speical tool. I also agree with the metric and standard thing but I think we should do away with standard altogether. I bet UFO's have all metric fastners on them.

what?!?!?! do away with standard and use only metric? i think you may need to put the aerosol can down and open the garage door to get some fresh air. up until now, i have never seen you post anything stupid. i guess we all have our bad days. just kiddin
Logged

Offline BDI

  • Hero Member
  • *****
  • Posts: 1,533
Re: BDI Law
« Reply #7 on: January 09, 2011, 05:34:44 AM »
Thats funny. You know this is the reason why we have vehicles that are half metric and half SAE. They past a law years ago that said the united states was supposed to make the switch over to metric by a certain year. Well do to the fact there are so many old guys that can't let go of the the SAE standard we are still struggling with the out dated idea. Maddoggy The old Guy thing was a dig just incase you didn't notice. :lol: :lol: :lol: :lol: The only time I have any use for the inch is when measuring stuff down in the thousands.
« Last Edit: January 09, 2011, 05:58:48 AM by BDI »
Logged
Smoke every cigarette like It's your last and ride like you stole something!!!

Offline RoostDaddy

  • Sr. Member
  • ****
  • Posts: 445
Re: BDI Law
« Reply #8 on: January 09, 2011, 12:00:52 PM »
Quote from: BDI on January 09, 2011, 05:34:44 AM
Thats funny. You know this is the reason why we have vehicles that are half metric and half SAE. They past a law years ago that said the united states was supposed to make the switch over to metric by a certain year. Well do to the fact there are so many old guys that can't let go of the the SAE standard we are still struggling with the out dated idea. Maddoggy The old Guy thing was a dig just incase you didn't notice. :lol: :lol: :lol: :lol: The only time I have any use for the inch is when measuring stuff down in the thousands.

Sorry to hear about your problem, but I dont think you had to announce it to the world!   :wink:
Logged
America is all about speed. Hot, nasty, bad-ass speed.

Offline kxpegger

  • Hero Member
  • *****
  • Posts: 855
Re: BDI Law
« Reply #9 on: January 09, 2011, 12:51:39 PM »
You guys ever heard of a pipe wrench? It can be used as a hammer too! :-D
Logged
North Las Vegas

"05" RMZ450, "08" KX500AF "11" KTM 450SX-F "12" KTM 250SX "15" KTM450SX-F

Offline BDI

  • Hero Member
  • *****
  • Posts: 1,533
Re: BDI Law
« Reply #10 on: January 10, 2011, 03:21:35 AM »
Quote from: RoostDaddy on January 09, 2011, 12:00:52 PM
Quote from: BDI on January 09, 2011, 05:34:44 AM
Thats funny. You know this is the reason why we have vehicles that are half metric and half SAE. They past a law years ago that said the united states was supposed to make the switch over to metric by a certain year. Well do to the fact there are so many old guys that can't let go of the the SAE standard we are still struggling with the out dated idea. Maddoggy The old Guy thing was a dig just incase you didn't notice. :lol: :lol: :lol: :lol: The only time I have any use for the inch is when measuring stuff down in the thousands.

Sorry to hear about your problem, but I dont think you had to announce it to the world!   :wink:
I don't get it  :? na but seriously the old guy remark was just a joke for maddoggy. I didn't mean to hurt any ones feelings.  :lol: :lol:
« Last Edit: January 10, 2011, 03:32:42 AM by BDI »
Logged
Smoke every cigarette like It's your last and ride like you stole something!!!

Offline BDI

  • Hero Member
  • *****
  • Posts: 1,533
Re: BDI Law
« Reply #11 on: January 10, 2011, 03:26:27 AM »
Quote from: kxpegger on January 09, 2011, 12:51:39 PM
You guys ever heard of a pipe wrench? It can be used as a hammer too! :-D
You know at one time I thought it would be funny to make a hammer that was also a crescent wrench as a joke. It would probably sell like crazy.
Logged
Smoke every cigarette like It's your last and ride like you stole something!!!

Offline bigbellybob

  • Sr. Member
  • ****
  • Posts: 261
Re: BDI Law
« Reply #12 on: January 10, 2011, 07:19:38 AM »
i have no problem doing away with SAE. just sucks i have been working so hard on my standard metric conversion.maybe we could just get rid of the ones that don't cross over on both sides. you know 14mm-9/16 then you go 15mm what for we could just skip that one and so on. :-D
Logged
IF RIDING IS OUTLAWED ONLY OUTLAWS WILL RIDE

IF RIDING IS OUTLAWED ONLY OUTLAWS WILL RIDE

IF RIDING IS OUTLAWED ONLY OUTLAWS WILL RIDE

IF RIDING IS OUTLAWED ONLY OUTLAWS WILL RIDE

sponsor
http://www.steelmx.com/

Offline maddoggy

  • Hero Member
  • *****
  • Posts: 711
  • K5 @ ST. ANTHONY DUNES
Re: BDI Law
« Reply #13 on: January 10, 2011, 05:00:02 PM »
Quote from: BDI on January 09, 2011, 05:34:44 AM
Thats funny. You know this is the reason why we have vehicles that are half metric and half SAE. They past a law years ago that said the united states was supposed to make the switch over to metric by a certain year. Well do to the fact there are so many old guys that can't let go of the the SAE standard we are still struggling with the out dated idea. Maddoggy The old Guy thing was a dig just incase you didn't notice. :lol: :lol: :lol: :lol: The only time I have any use for the inch is when measuring stuff down in the thousands.

oh, right to the junk, that hurts! considering the fact that i'm probably younger than you though, it doesn't hurt much. :lol: :lol:
« Last Edit: January 10, 2011, 05:06:47 PM by maddoggy »
Logged

Offline maddoggy

  • Hero Member
  • *****
  • Posts: 711
  • K5 @ ST. ANTHONY DUNES
Re: BDI Law
« Reply #14 on: January 10, 2011, 05:05:12 PM »
Quote from: BDI on January 10, 2011, 03:26:27 AM
Quote from: kxpegger on January 09, 2011, 12:51:39 PM
You guys ever heard of a pipe wrench? It can be used as a hammer too! :-D
You know at one time I thought it would be funny to make a hammer that was also a crescent wrench as a joke. It would probably sell like crazy.

i had a crescent wrench once that was also a hammer on the backside. it was factory made. we passed it around to different guys' toolboxes as a running joke for years. i can't remember the brand. i guess thats my alzhiemers kickin in huh. :lol: :-D
Logged
Pages: [1] 2   Go Up
« previous next »