« previous next »
Pages: [1]   Go Down

Author Topic: Reeds?  (Read 5397 times)

0 Members and 1 Guest are viewing this topic.

Saner

  • Guest
Reeds?
« on: November 29, 2005, 02:58:57 AM »
If I change the stock reeds to more aggressive reeds (Boysen Pro Series), is there anything else I have to change? ie:carb adjustments etc.  Also is there a noticable difference over stock?  What are the advantages, and most importantly what are the disadvantages of changing from stock? ie:reliablility.

Thanks!

~SaneR~
KX100
Logged

Offline YUNGGUNNAZ

  • Full Member
  • ***
  • Posts: 219
RE: Reeds?
« Reply #1 on: November 30, 2005, 12:25:18 AM »
with most aftermarket reeds you should feel more throttle response.the type of reed(carbon fiber)as well as thickness will make some difference.the boysen is a good all around choice.good midrange.for custom sizes i use tdr or mossbarger.by the way tdr makes them for other mfgs.as with any changes you should check jetting.
Logged

Saner

  • Guest
RE: Reeds?
« Reply #2 on: November 30, 2005, 01:18:41 AM »
Thanks for the info. I'm going to look more into this.
Logged

Offline machine

  • Sr. Member
  • ****
  • Posts: 250
Reeds?
« Reply #3 on: November 30, 2005, 08:35:43 AM »
Saner;  Let us know what you find out!
my wife bought me a set last X-Mas, and I still haven't put them in!!!! :roll:
Logged

Saner

  • Guest
Reeds?
« Reply #4 on: December 01, 2005, 02:00:48 AM »
I definitely will, machine.  XMas is coming up soon so I want to learn more about those questions I have, before my wife springs for them.
Logged

Offline alan

  • Administrator
  • Hero Member
  • *****
  • Posts: 1,476
Reeds?
« Reply #5 on: December 01, 2005, 10:21:56 AM »
No big deal, but this topic should be in the mods section! The general section is for off beat and BS stuff.

Alan  :wink:
Logged
Sand - Dirt - Dunes = Fun
       04- 700V - 01- KX500
        08 TeryX 2012 KX450F

Saner

  • Guest
Reeds?
« Reply #6 on: December 02, 2005, 12:32:38 AM »
Oops, sorry.
Logged

Offline Spider

  • Full Member
  • ***
  • Posts: 173
Reeds?
« Reply #7 on: December 02, 2005, 03:26:17 AM »
Hey Saner,
If you try a search for reeds in the mods section you will probably get plenty of info that way. I don't know how much will apply to your size bike, but it's a "Quick & Easy" way to get needed info in a hurry. It's what I use when I need some info.

2cents
Hope it helps
Dale

By the way I use Vforce 2 and a Moose spacer.  8)
Logged

Offline gowen

  • Resident Newbie
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1,350
  • www.KXRiders.com
Re: Reeds?
« Reply #8 on: December 02, 2005, 05:11:21 AM »
Quote from: Saner
If I change the stock reeds to more aggressive reeds (Boysen Pro Series), is there anything else I have to change? ie:carb adjustments etc.  Also is there a noticable difference over stock?  What are the advantages, and most importantly what are the disadvantages of changing from stock? ie:reliablility.

Thanks!

~SaneR~
KX100


SaneR,  they are worth the weight in gold. Especially in your KX100. I personally put them in my two (at one point) CR125s, CR250s, and CR80s. Also including two KDX200s.. Oh yeah, and not to forget, they were my first choice when getting my KX500, which I would still be using, but I now use the Rad Valve. They start easier, last longer, and have more low-end through top-end. Especially the topend.  You do usally have to do minor main-jet changes. But they are usally documented and/or call Boyesen and they give you good information on that part.
Logged

Saner

  • Guest
RE: Re: Reeds?
« Reply #9 on: December 05, 2005, 01:31:48 AM »
Thanks gowen!  So far I've gathered that the upgrade is mostly benefits.
Logged
Pages: [1]   Go Up
« previous next »