Author Topic: kx500 Engine WHAT YEAR IS IT?  (Read 5824 times)

0 Members and 1 Guest are viewing this topic.

Offline BacK.IN.THE.DaY

  • Jr. Member
  • **
  • Posts: 37
kx500 Engine WHAT YEAR IS IT?
« on: November 16, 2010, 11:20:59 AM »
Hi i have just signed up to this GREAT site.

I need help with my k5 engine and what year it is.
or could be. I have posted a Pic. I heard the 88 engine
is meant to be a  POWER HOUSE ?

ANY HELP IS APPRECIATED

Offline suicyde

  • Full Member
  • ***
  • Posts: 125
Re: kx500 Engine WHAT YEAR IS IT?
« Reply #1 on: November 16, 2010, 01:16:53 PM »
Hi i have just signed up to this GREAT site.

I need help with my k5 engine and what year it is.
or could be. I have posted a Pic. I heard the 88 engine
is meant to be a  POWER HOUSE ?

ANY HELP IS APPRECIATED

looks like an '86 to me I think they were silver by '88, but not 100 percent sure.

Motorrad

  • Guest
Re: kx500 Engine WHAT YEAR IS IT?
« Reply #2 on: November 16, 2010, 01:56:27 PM »
I vote 86-87.     Looks very similar to my 87 (without going out and looking at it). Same bolt on water elbow on head.. Kips sticker box cast on cyl...

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: kx500 Engine WHAT YEAR IS IT?
« Reply #3 on: November 16, 2010, 02:39:25 PM »
Check your engine ID number and compare to this chart:
http://oem-cycle.com/KAWASAKIKX500BIKEID.aspx
Sweet 8-)
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline BacK.IN.THE.DaY

  • Jr. Member
  • **
  • Posts: 37
Re: kx500 Engine WHAT YEAR IS IT?
« Reply #4 on: November 17, 2010, 04:10:04 AM »
THE ENGINE IS SILVER LIKE THE K5 ENGINE THATS SAYS KIPS
ON THE BORE. UNDER THE BLACK FLAKY PAINT
BUT DOES NOT SAY KIPS ON THE SIDE?

AND I WOULD USE TO FIND OUT BUT SOME NOBHEAD
HAS CUT THE NUMBER ENGINE NUMBER OFF. ARSHOLES.

THANKS FOR YOUR HELP GUYS. :-D.

Offline Speedway73

  • Full Member
  • ***
  • Posts: 94
Re: kx500 Engine WHAT YEAR IS IT?
« Reply #5 on: November 18, 2010, 12:36:36 AM »
'86-'87. Bolt on water fitting on the head = the heads from newer years won't interchange. Got the wrong partial ignition on it too. Should have an external flywheel...not an internal rotor. Also....looks like a front sprocket held on by a nut= '88+ were held on by an external circlip.

Offline BacK.IN.THE.DaY

  • Jr. Member
  • **
  • Posts: 37
Re: kx500 Engine WHAT YEAR IS IT. I NEED TO ORDER SOME PARTS
« Reply #6 on: November 18, 2010, 08:36:09 AM »
THANKS SPEEDWAY 73

yes the sprocket is held on with a nut

THIS IS A PVL IGNITION.THE STATOR AND STATOR PLATE ARE TRASHED
I WAS GOING TO BUY THIS OF EBAY. PLEASE TYPE IN EBAY SEARCH BAR  ( 150364780337 )
I HAVE THE ROTOR AND STM ELECTRONICA CDI AND I SPOKE TO THE GUY FROM EBAY. WHO SAID HE MADE THIS BACK IN 97. HE ASKED ME TO SEND IN MY CDI AND STATOR AND STATOR PLATE TO HIM. AND HE ASKED ME TO SEND DETAILS SO HE CAN MAKE IT UP WITH A TIMMING MARK ON THE TEST RIG :-D

PISTON TRAVEL IN mm BEFORE T.D.C TOP DEAD CENTRE DOES 84 X 86mm MEAN ANY THING
OR
DEGREES BEFORE T.D.C TOP DEAD CENTRE.

PICS OF STATOR - CDI - STATOR PLATE

ANY HELP IS APPRECIATED  :-D

Offline don46

  • Hero Member
  • *****
  • Posts: 1,140
Re: kx500 Engine WHAT YEAR IS IT?
« Reply #7 on: November 18, 2010, 10:40:20 AM »
The vintage of 86-88 look the same, the clutch is different between the years, and if you use a nut to hold the counter shaft sprocket it is either 86 or 87 pull the clutch cover and get a picture of the clutch, I think 86 had 5 springs and a different release mechanism than the 87. not sure about the 84x86 but stroke is 86 and bore is 86. If you can get a complete ignition from basically any kx500 from 86-2004 it would work, but like I say complete.
Live today, for tomorrow may never come

Offline BacK.IN.THE.DaY

  • Jr. Member
  • **
  • Posts: 37
Re: kx500 Engine WHAT YEAR IS IT?
« Reply #8 on: November 20, 2010, 02:00:32 AM »
THANKS FOR YOUR HELP.

SO COULD I USE MY STM CDI OR WOULD I NEED THE CDI ASWELL PLEASE?

BECAUSE

I CAN GET A ROTOR AND STATOR FOR IT FROM 86 TO 88 I THINK IT WAS

NEED A FAST REPLY PLEASE

ANY HELP APPRECIATED