« previous next »
Pages: [1]   Go Down

Author Topic: 2001 KX 125 ignition  (Read 4899 times)

0 Members and 1 Guest are viewing this topic.

dezracer

  • Guest
2001 KX 125 ignition
« on: January 28, 2006, 05:35:32 AM »
I replaced the stock 2001 kx 125 motor with a 2001 KX 144 motor that I picked up from Eric Gorr.  Everything bolts up except for the CDI box.  The bike that I have has a 4 wires coming off the CDI box and the stator but the 2001 KX 144 has 6 wires at the connector for the CDI box and 6 wires coming from the stator.  I called the local dealer and they said there are 2 different models for that year.  Is there anyway to make it work or will I have to buy the correct CDI?  I still have the old motor and I was thinking about just swapping the electrical compoments to the new one.  Will this work as well?

Thanks,
Chris
Logged

dezracer

  • Guest
2001 KX 125 ignition
« Reply #1 on: January 30, 2006, 09:33:03 AM »
To kind of answer my own question it looks like whoever owned the motor before me replaced 2001 wiring with the wiring from a 2003.
Logged

Offline alan

  • Administrator
  • Hero Member
  • *****
  • Posts: 1,476
2001 KX 125 ignition
« Reply #2 on: January 30, 2006, 09:37:33 AM »
Sorry there doesn't seem to be anyone on the site that is familiar with your bike at the moment!

Alan :oops:
Logged
Sand - Dirt - Dunes = Fun
       04- 700V - 01- KX500
        08 TeryX 2012 KX450F

Offline gowen

  • Resident Newbie
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1,350
  • www.KXRiders.com
2001 KX 125 ignition
« Reply #3 on: January 30, 2006, 10:06:12 AM »
dezracer, it should work fine. Check the stator. If they look the same, check the firing point on the stator. if it is the same and will fit under the flywheel. You will be fine. It should bolt up, I just rebuilt the engine on a friends KX144. :-) You won't be disapointed. They rock!!!
Logged

dezracer

  • Guest
2001 KX 125 ignition
« Reply #4 on: January 31, 2006, 02:42:54 AM »
Quote from: gowen
dezracer, it should work fine. Check the stator. If they look the same, check the firing point on the stator. if it is the same and will fit under the flywheel. You will be fine. It should bolt up, I just rebuilt the engine on a friends KX144. :-) You won't be disapointed. They rock!!!


I'm about 99% sure it's the ignition from a 2003.  I'm going to pick up the CDI from ebay and if that doesn't work then I'll swap the parts from the original motor.  The bike is actually for my wife but I'm sure I'll take it for a spin.

Thanks,
Chris
Logged

dezracer

  • Guest
Re: 2001 KX 125 ignition
« Reply #5 on: February 18, 2006, 07:40:34 AM »
Anyone know what size flywheel puller to use for the 2001 kx125?
Logged

Offline alan

  • Administrator
  • Hero Member
  • *****
  • Posts: 1,476
Re: 2001 KX 125 ignition
« Reply #6 on: February 18, 2006, 01:29:44 PM »
I am not sure what size, but the service manual lists an Kawie part # as 57001-252!

Hope that helps, maybe you can check that part# on the kawie website.

Alan 8-)
Logged
Sand - Dirt - Dunes = Fun
       04- 700V - 01- KX500
        08 TeryX 2012 KX450F

Offline alan

  • Administrator
  • Hero Member
  • *****
  • Posts: 1,476
Re: 2001 KX 125 ignition
« Reply #7 on: February 18, 2006, 01:37:56 PM »
BikeBandit.com

57001-252
   
614037-001
   
PULLER,ROTOR
OPTION
   
$21.52
Logged
Sand - Dirt - Dunes = Fun
       04- 700V - 01- KX500
        08 TeryX 2012 KX450F

Offline hughes

  • Hero Member
  • *****
  • Posts: 1,923
    • Dirt Hammers
Re: 2001 KX 125 ignition
« Reply #8 on: February 19, 2006, 04:12:31 AM »
Try e-bay. I picked up a flywheel puller for my 500 for under 15.00 bucks.
Logged
Open Class 2-Stroke Kawasaki KX500
Yamaha 2005 YZ250
Richard Hughes
Dirt Hammers - Online Off-Road Journal
hughes@dirthammers.com
http://www.dirthammers.com
Pages: [1]   Go Up
« previous next »