Rear hub for KX250

[Adon]

G'day.

I'm soon to replace the rear hub on my 1999 KX250 but i was curious as to what other ones would fit?

Would a rear hub off an earlier model or later model fit?

Thanks in advance

[Coop]

If posting this link breaks a rule, I apologize in advance.

But follow the steps in this link for how to do a parts cross reference:

http://www.thumpertalk.com/forum/thread/879348/kawasaki-parts-reference

[sandblaster]

Here is some hub info on your bike:
R-1287 -
20MM AXLE -
BRG TO BRG 129MM
ROTOR DIAMETER 8 15/16" -
ROTOR BOLT CIRCLE 115MM -
SPROCKET BOLT CIRCLE 151MM
FITS 99-02 KX125, 250
You can use hubs as old as 1990 but the hub styles changed over the years.

[ShadeTreeFab]

http://oem-cycle.com/KAWASAKIKX500BIKEID.aspx

[don46]

you could use hubs from clear back to 89, 125, 250, and 500, however back in about 97 kawasaki went to two bearings on the sprocket side, as I recall the spacing from the face of the bearing to the swingarm was the same. 2003 and up use a 25mm axle so they are out of the question

[traileater]

Ive got an 89 250 im parting out. The rear hub is still available if you need it.