Author Topic: Stator removal??  (Read 3649 times)

0 Members and 1 Guest are viewing this topic.

Offline KXer

  • Full Member
  • ***
  • Posts: 63
  • Ride hard, ride fast, go home safe.
    • Race-dezert.com
Stator removal??
« on: September 06, 2010, 01:35:10 PM »
This is probably just out of my patience range right now after tearing down the top end and finding a broken piston, horribly scored head and chunks missing out of the cylinder wall.  Can someone enlighten me on how you get to the stator.  Under the stator cover I am at a cap with phillips head screws around the perimeter and a 17mm nut in the middle.

Thanks in advance.
Stupidity should hurt!

Offline 3Razors

  • Full Member
  • ***
  • Posts: 109
Re: Stator removal??
« Reply #1 on: September 06, 2010, 04:46:27 PM »
Manual :roll: Should be 1st purchase with every bike.

Offline Friar-Tuck

  • Hero Member
  • *****
  • Posts: 1,827
  • \o/ Live Free or Die
Re: Stator removal??
« Reply #2 on: September 06, 2010, 05:36:07 PM »
KXer,
 Your going to need a 27mm flywheel puller,
(Looks like This)
 http://www.rockymountainatvmc.com/productDetail.do?navType=type&webTypeId=203&navTitle=Engine&webCatId=17&keyword=PULLER&prodFamilyId=17329
              Remove the flywheel  and expose the stater for testing or
or replacement. 
  I'll try to get some picc's up tomorrow..
  Tuck\o/
"The Truth Has No Agenda"

Offline greencannon

  • Full Member
  • ***
  • Posts: 203
Re: Stator removal??
« Reply #3 on: September 07, 2010, 04:56:47 PM »
Be careful!!...stator screws are probably philips head and really soft. Strip them out and feel your blood boil from an already heated situation, been there.
 I use a large philips bit to fit very snug on a small hammer type impact driver give em a light whack and they break free. If you should strip them a cutoff
wheel on a dremel rotary tool will cut a slot for a  straight blade screwdriver(impact)

Offline bmulanax30

  • Jr. Member
  • **
  • Posts: 31
  • kx zilla 500 rider
Re: Stator removal??
« Reply #4 on: September 24, 2010, 09:53:05 AM »
can someone post pics of them doing the removal  for referance would be awesome  has anyone did the flywheel weight  is it worth the trouble of doing or put a pvl  system on the k5 any info would be awesome thanks
kx 500 the beast

Offline kaw rider

  • Hero Member
  • *****
  • Posts: 1,218
  • Cool your engine with water not fuel
Re: Stator removal??
« Reply #5 on: September 24, 2010, 03:52:38 PM »
B
Stay away from the pvl ignition.

Offline DoldGuy

  • Hero Member
  • *****
  • Posts: 1,198
Re: Stator removal??
« Reply #6 on: September 25, 2010, 12:38:54 AM »
Its Never too Late to Have a Happy Childhood!

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: Stator removal??
« Reply #7 on: September 25, 2010, 07:22:41 AM »
+2  :-(
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Motorrad

  • Guest
Re: Stator removal??
« Reply #8 on: September 25, 2010, 05:44:35 PM »
Can we get this moved to it's proper section.  Don't want to clutter up this one

"Changing the power delivery.
Theory and proven modifications.
SERIOUS DISCUSSION ONLY."

Offline bmulanax30

  • Jr. Member
  • **
  • Posts: 31
  • kx zilla 500 rider
Re: Stator removal??
« Reply #9 on: September 25, 2010, 07:24:21 PM »
good to know  thanks peeps
kx 500 the beast

Offline KayEx5hunSM

  • Newbie
  • *
  • Posts: 2
Re: Stator removal??
« Reply #10 on: October 17, 2010, 04:48:56 PM »
What's wrong with the PVL? Just picked up a K5 and it has a PVL on it. Let me know.
Thanks guys!

Offline alward25

  • Hero Member
  • *****
  • Posts: 1,349
Re: Stator removal??
« Reply #11 on: October 17, 2010, 08:12:08 PM »
Be careful!!...stator screws are probably philips head and really soft. Strip them out and feel your blood boil from an already heated situation, been there.
 I use a large philips bit to fit very snug on a small hammer type impact driver give em a light whack and they break free. If you should strip them a cutoff
wheel on a dremel rotary tool will cut a slot for a  straight blade screwdriver(impact)

They are a #3 philips and most people try to remove them with a #2.  But they are soft.
"Let there be light"

Offline 3Razors

  • Full Member
  • ***
  • Posts: 109
Re: Stator removal??
« Reply #12 on: October 20, 2010, 02:06:04 AM »
What's wrong with the PVL? Just picked up a K5 and it has a PVL on it. Let me know.
Thanks guys!

PVL works great.  Don't listen to the naysayers. The fastest drag bikes in the world run them.  I love mine.  Use .090 btdc timing setting.

Offline kaw rider

  • Hero Member
  • *****
  • Posts: 1,218
  • Cool your engine with water not fuel
Re: Stator removal??
« Reply #13 on: October 20, 2010, 02:31:34 AM »
i know alot of guys that use them on there cr500 and dont have problems like some of the guys with the kx500 motor.

Offline BDI

  • Hero Member
  • *****
  • Posts: 1,533
Re: Stator removal??
« Reply #14 on: October 20, 2010, 03:49:54 AM »
I think you are more apt to hear about the problems people have. It's like at work, you could do a thousand things right every day and no one ever says anything about it but if you screw up once then everyone hears about it.
Smoke every cigarette like It's your last and ride like you stole something!!!