« previous next »
Pages: [1] 2   Go Down

Author Topic: '93 KX 500 rebuild  (Read 7524 times)

0 Members and 1 Guest are viewing this topic.

Offline jbehunin

  • Full Member
  • ***
  • Posts: 50
'93 KX 500 rebuild
« on: September 06, 2010, 12:03:18 PM »
I found a pretty clean and unused 93 KX 500. After riding it one weekend, I knew right off the bat that it needed some TLC.

Well a few weeks have passed and now I am about 90% done. All I need now is some new plastic, seat cover, tires and graphiccs.
But I am kind of fond of the stock 93 look.

After tearing the bike apart, I found out that the top end had never been touched. The KIPS valve was ccompletely froze up from carbon build up. The bearings were in pretty good shape, and just needed to be repacked.

After cleaning and rebuilding the top end, new clutches, new valving front and rear with new springs on the suspension, this bike has come to life.
Logged

Offline crawford

  • Newbie
  • *
  • Posts: 9
Re: '93 KX 500 rebuild
« Reply #1 on: September 06, 2010, 05:33:36 PM »
that is a clean '93... good job
Logged

Offline Friar-Tuck

  • Hero Member
  • *****
  • Posts: 1,827
  • \o/ Live Free or Die
Re: '93 KX 500 rebuild
« Reply #2 on: September 06, 2010, 05:42:01 PM »
 Hey JB,
 That bike is in great shape!    I'll be looking forward to a ride report!  :-D
    Tuck\o/
   
Logged
"The Truth Has No Agenda"

Offline ID KX500

  • Hero Member
  • *****
  • Posts: 626
  • Life, Liberty, and The Pursuit of Happiness
Re: '93 KX 500 rebuild
« Reply #3 on: September 06, 2010, 07:37:51 PM »
What a relief it must have been for the Kawasaki engineers to wake up from 1988-2004 knowing that most of the work was already done on the KX500 sitting there only needing a tweak.
Logged
"Endeavor to persevere."

Offline hughes

  • Hero Member
  • *****
  • Posts: 1,923
    • Dirt Hammers
Re: '93 KX 500 rebuild
« Reply #4 on: September 07, 2010, 01:56:05 AM »
Nice 93 500 / time to get it dirty.
Logged
Open Class 2-Stroke Kawasaki KX500
Yamaha 2005 YZ250
Richard Hughes
Dirt Hammers - Online Off-Road Journal
hughes@dirthammers.com
http://www.dirthammers.com

Offline jbersano

  • Full Member
  • ***
  • Posts: 67
Re: '93 KX 500 rebuild
« Reply #5 on: September 07, 2010, 04:38:05 AM »
very nice!!!! good job!!!!
Logged

Offline tharden

  • Full Member
  • ***
  • Posts: 109
Re: '93 KX 500 rebuild
« Reply #6 on: September 07, 2010, 04:56:19 AM »
Nice! Got to love the kx500.
Logged

Offline jbehunin

  • Full Member
  • ***
  • Posts: 50
Re: '93 KX 500 rebuild
« Reply #7 on: October 23, 2010, 09:14:50 AM »
After I got the bike together, I took it out for a ride. I was cautious at first, wanting the motor to break in properly.
Towards the end of our ride, I was a little disappointed in the bike. The bike ran great from the low end to mid, but fell flat on the top.
I asked around, and finally a buddy of mine, who happens to be a Kawi mechanic, told me to check to see if the valve is opening all the way.
Long story short, I tore the top end off of it.
The valves were installed close!!!
Well, my buddy did the KIPS mod that everyone raves about, and as I put it back together, I was giddy.
The bike fired right up, and it had a totally different sound to it. It sounded more crisp and throaty. A quick ride up and down the street put a perma grin on my face!
Well next weekend I will take it back out and try it again! :-D :-D :-D :-D
Logged

Offline martinfan30

  • Sr. Member
  • ****
  • Posts: 456
  • 2000 KX500
Re: '93 KX 500 rebuild
« Reply #8 on: October 23, 2010, 10:33:09 AM »
Very nice ride man!!! Have fun on her!
Logged
2000 KX500
2005 XR650L

Neither are stock, and both are great desert bikes.

Offline medicman

  • Jr. Member
  • **
  • Posts: 34
Re: '93 KX 500 rebuild
« Reply #9 on: October 23, 2010, 12:42:32 PM »
Out of curiosity, what is "the kips mod" hes refering to?
Logged

Offline jbehunin

  • Full Member
  • ***
  • Posts: 50
Re: '93 KX 500 rebuild
« Reply #10 on: October 23, 2010, 01:57:51 PM »
I have no idea. Hes an old mechanic from way back when. He has been wrenching on Kawasaki's for a long time. I told him my problem, and what I wanted the bike to do. He said he modified the kips valve. as far as what he did, i don't know.
But the thing is crisp, and it will rip your arms out!!!!
Logged

Offline Froggy

  • Newbie
  • *
  • Posts: 9
Re: '93 KX 500 rebuild
« Reply #11 on: October 23, 2010, 08:30:18 PM »
great job! If mine looks like yours at the end of rebuilt, I would be so happy!
Logged

Offline kwakman

  • Hero Member
  • *****
  • Posts: 879
  • Kwikasfuki KX500
Re: '93 KX 500 rebuild
« Reply #12 on: October 24, 2010, 03:26:50 AM »
pipe looks like a gnarly desert.should go well at high rpm now your p/v works.looks real clean too.
Logged
And lo, I did loft the front wheel and carried it forth to the unbelievers, and cast it down before them and said unto them ''look now upon the might of my throttle control ye pitiful cretinous ones''
And the unbelievers did quake in their boots....

Offline martinfan30

  • Sr. Member
  • ****
  • Posts: 456
  • 2000 KX500
Re: '93 KX 500 rebuild
« Reply #13 on: October 24, 2010, 08:31:08 AM »
Logged
2000 KX500
2005 XR650L

Neither are stock, and both are great desert bikes.

Offline neckcrank

  • Jr. Member
  • **
  • Posts: 27
Re: '93 KX 500 rebuild
« Reply #14 on: October 25, 2010, 04:15:46 PM »
Where did you get that frame guard thing over the chain?
Logged
Pages: [1] 2   Go Up
« previous next »