Author Topic: 86 KX5 Shock  (Read 2009 times)

0 Members and 1 Guest are viewing this topic.

Offline Pvo

  • Full Member
  • ***
  • Posts: 110
    • OlesenMoto
86 KX5 Shock
« on: August 02, 2010, 03:12:16 PM »
Hi everyone I just bought an 86' KX 500 and need a rear shock for it.  The one that came with it is junk so I'd like to know what all would fit in its place.  I'm open to different model years of KXs or even other newer bikes.  Any help or info is appreciated.

Offline Friar-Tuck

  • Hero Member
  • *****
  • Posts: 1,827
  • \o/ Live Free or Die
Re: 86 KX5 Shock
« Reply #1 on: August 03, 2010, 06:20:20 AM »
  Hey Pvo,
 Welcome to the gang,   There have been guys who have swapped out suspension componants without too much trouble if I remember correctly.   There are also places you can send your current shock to be re-valved and re-built.
  Unfortunately it does always come down to money.  I re-built my rear shock for about $100.00
A service manual,seals, and nitrogen.   If the replacement shock doesn't pan out maybe we can help you either re-build your old one or recommend somewhere to send it off to.
    I think first off you should get the dimensions of your current shock, Travel, length and bolt sizes for each end.
Then maybe some of the guys can check that against their "stock" and look for something close.
  Tuck\o/ 
"The Truth Has No Agenda"

Offline Pvo

  • Full Member
  • ***
  • Posts: 110
    • OlesenMoto
Re: 86 KX5 Shock
« Reply #2 on: August 07, 2010, 02:48:33 PM »
Center to center the shock is about 17".  Travel is around 5".  The top bolt hole is 12mm and the bottom is 10mm.

Offline kwakman

  • Hero Member
  • *****
  • Posts: 879
  • Kwikasfuki KX500
Re: 86 KX5 Shock
« Reply #3 on: August 09, 2010, 12:27:04 AM »
the travel is way more than 5 inches, more lioke 10 -12, see clymer manual. a shock from an 83 onward will fit or rebuild your 86.nitrogen canister on 87 shock gets in way, I tried... :cry:
And lo, I did loft the front wheel and carried it forth to the unbelievers, and cast it down before them and said unto them ''look now upon the might of my throttle control ye pitiful cretinous ones''
And the unbelievers did quake in their boots....

Offline Pvo

  • Full Member
  • ***
  • Posts: 110
    • OlesenMoto
Re: 86 KX5 Shock
« Reply #4 on: August 09, 2010, 02:56:21 PM »
I just guestimated the travel I don't have a clymer to look at.  I can't rebuild mine cheaply because the chrome on the rod is junk.  I was thinking about using the 87 shock and linkage and then saw that the frames are different between the two years.

Offline byron909

  • Full Member
  • ***
  • Posts: 91
Re: 86 KX5 Shock
« Reply #5 on: August 09, 2010, 11:11:42 PM »
really your only years are 85-86. 87 up too normal for it, 84 might work but i bet you would never find one. look on ebay. when i rebuilt mine, my body was screwed. found a good parts shock on ebay for 15 bucks.
1984 cr500 1985 kx125 1999ktm300mxc
1986 cr500 1986 kx500 2013.5 ktm450 fe
1987 cr500 1994 kx500
1991 cr500 2000 kx125
1995 cr250 2008 kx500
1995 cr500
2003 cr250
2003 cr500
2008 cr500