« previous next »
Pages: [1]   Go Down

Author Topic: Ohm Readings  (Read 1841 times)

0 Members and 1 Guest are viewing this topic.

Offline teamwsr

  • Jr. Member
  • **
  • Posts: 24
Ohm Readings
« on: July 08, 2010, 11:46:33 AM »
Hey guys, I was hoping you could help me out. I searched on the site but could not find the answers. I have a 1990 KX500 in a 2004 KX250 frame and last time I went for a ride it had no spark. I gave my manual away to my buddy, who has moved away awhile ago when I sold him my 1990. I don't really want to buy a manual for just the motor, basically since I can rebuild a 500 motor in my sleep, I have all the torques written down but forgot to write down the ohm readings for the coil and stator. The motor only has about 30 hours on it and the mag looks great so I wanted to double check before I just throw parts at it. Thanks in advance for any help.

Ron
Logged

Offline Rd

  • Full Member
  • ***
  • Posts: 114
Re: Ohm Readings
« Reply #1 on: July 08, 2010, 01:27:04 PM »
Ignition coil winding resistance
Primary windings .31ohm +-15%
Secondary windings 3.1K ohms +-15%

Stator coil ressistnace 
Blk/Wht - Blk/Yellow  153-230 ohms
Wht/Red- Blk/Yellow  7.9-11.9 ohms

From the 90/91 supplement.
Later Roger
Logged

Offline teamwsr

  • Jr. Member
  • **
  • Posts: 24
Re: Ohm Readings
« Reply #2 on: July 08, 2010, 01:36:49 PM »
Wow, quick reply. :-D Thanks alot.

Ron
Logged

Offline Friar-Tuck

  • Hero Member
  • *****
  • Posts: 1,827
  • \o/ Live Free or Die
Re: Ohm Readings
« Reply #3 on: July 08, 2010, 11:13:33 PM »
« Last Edit: July 08, 2010, 11:24:10 PM by Friar-Tuck »
Logged
"The Truth Has No Agenda"

Offline teamwsr

  • Jr. Member
  • **
  • Posts: 24
Re: Ohm Readings
« Reply #4 on: July 11, 2010, 01:16:02 AM »
Thanks guys, i've got  a bad coil. Ordrered a new one yesterday should be back up and running next week. :-D
Ron
Logged

Offline DoldGuy

  • Hero Member
  • *****
  • Posts: 1,198
Re: Ohm Readings
« Reply #5 on: July 11, 2010, 03:28:52 AM »
Ron,
I had a similar problem & ordered a new coil, installed & still had the same problem. The new coil came without the plug cap so I installed the original one. The cap was bad & not the coil. Hope this saves you the headache if you checked resistance with the cap on.

DoldGuy
Logged
Its Never too Late to Have a Happy Childhood!

Offline teamwsr

  • Jr. Member
  • **
  • Posts: 24
Re: Ohm Readings
« Reply #6 on: July 11, 2010, 06:56:28 AM »
Quote
Ron,
I had a similar problem & ordered a new coil, installed & still had the same problem. The new coil came without the plug cap so I installed the original one. The cap was bad & not the coil. Hope this saves you the headache if you checked resistance with the cap on.

DoldGuy
Quote

Thanks for the heads up, I actually checked with it on and then off, no resistance either way, so hopefully it will be a go. Gotta say though I love this site and tell all my KX friends about it.

Ron
Logged
Pages: [1]   Go Up
« previous next »