« previous next »
Pages: [1]   Go Down

Author Topic: Carburetor Setup  (Read 1862 times)

0 Members and 1 Guest are viewing this topic.

Offline bpruiett666

  • Newbie
  • *
  • Posts: 1
Carburetor Setup
« on: May 10, 2010, 12:03:09 AM »
I just bored my 2001 kx125 sleeve from a 54mm to a 56mm and I am using a wiseco prolite piston.  I am at about 100-200 above sea level.  Do I need to make any adjustments to my carb, such as jetting?  Or will the jetting I had before be close enough?
Logged

Offline Coop

  • Full Member
  • ***
  • Posts: 107
Re: Carburetor Setup
« Reply #1 on: May 10, 2010, 04:50:14 AM »
My money is you will find the pilot is ok but that you are a little running rich on the main now. Just sharing my experiences jetting big bores.
Logged
"Twenty years from now, you will be more disappointed by the things that you didn't do than by the ones you did do"- Mark Twain

1997 CR80RB, 1993 KX60, 1988 KX125
Pages: [1]   Go Up
« previous next »