« previous next »
Pages: 1 [2]   Go Down

Author Topic: 87 kx 500  (Read 7355 times)

0 Members and 2 Guests are viewing this topic.

Offline 5004life

  • Jr. Member
  • **
  • Posts: 21
Re: 87 kx 500
« Reply #15 on: March 14, 2010, 05:10:57 AM »
not trying to be an a$$ or anything but why does it even matter any grease is gonna melt and run off eventually and the lube in the fuel should take over then
Logged

Offline Bigtim

  • Full Member
  • ***
  • Posts: 125
Re: 87 kx 500
« Reply #16 on: March 14, 2010, 06:04:56 AM »
kawi calls for moly there b/c of its high heat resistance, +1500?F. My tube came from Honda  :roll: ask for it at the red dealer, u can recognize moly by its very distinct odor.
My personal opinion would be to do it right the first time with factory specified lubricants, but as mentioned, after running awhile the exhaust spooge of burnt 2stroke oil lubes some. They told you to just use BR grease, b/c thats what they had available to sell you. 4oz tube of moly might cost as much as two, 1lb tubs of the blue stuff.  I guess bottom line.....the wrong grease is better than none at all :mrgreen:
Logged

Offline Bigtim

  • Full Member
  • ***
  • Posts: 125
Re: 87 kx 500
« Reply #17 on: March 14, 2010, 06:10:53 AM »
on that note, I just remembered lightly coating pv parts with H1R, the last time I did a parking lot top end and only had track box with very limited chemicals :-D
Logged

Offline dave916

  • Hero Member
  • *****
  • Posts: 546
Re: 87 kx 500
« Reply #18 on: March 14, 2010, 06:56:27 AM »
Quote from: 5004life on March 14, 2010, 05:10:57 AM
not trying to be an a$$ or anything but why does it even matter any grease is gonna melt and run off eventually and the lube in the fuel should take over then
the copper grease i used is not going to melt until +2000"f ,
dont think the lube in fuel is going to lube powervales, gears ,bushes [ except for slightly around exhaust sub ports]
 i would not use any grease less than molygrease quality [ie any gease with a melting point below 1500f]
 melting boiling grease is probabaly going to do more harm than good
Logged

Offline Bigtim

  • Full Member
  • ***
  • Posts: 125
Re: 87 kx 500
« Reply #19 on: March 14, 2010, 01:22:17 PM »
melting point? :lol:
Logged

Offline dave916

  • Hero Member
  • *****
  • Posts: 546
Re: 87 kx 500
« Reply #20 on: March 15, 2010, 05:55:52 AM »
Quote from: Bigtim on March 14, 2010, 01:22:17 PM
melting point? :lol:
what do u call it when grease overheats and turn to liquid?
Logged

Offline Bigtim

  • Full Member
  • ***
  • Posts: 125
Re: 87 kx 500
« Reply #21 on: March 15, 2010, 10:50:40 PM »
 :lol:I knew what you meant! Just razzing. Technically, melting point is when things turn from solid to liquid. Not sure if you can apply that to an amorfious substance like grease, toothpaste, or ketchup( catsup). Thermal breakdown, or viscus change maybe? Again, I knew what you meant, just having fun :roll:
Logged

Offline dave916

  • Hero Member
  • *****
  • Posts: 546
Re: 87 kx 500
« Reply #22 on: March 16, 2010, 07:12:34 AM »
Quote from: Bigtim on March 15, 2010, 10:50:40 PM
:lol:I knew what you meant! Just razzing. Technically, melting point is when things turn from solid to liquid. Not sure if you can apply that to an amorfious substance like grease, toothpaste, or ketchup( catsup). Thermal breakdown, or viscus change maybe? Again, I knew what you meant, just having fun :roll:

try a google search  : melting grease    :-D :-D
Logged

Offline Bigtim

  • Full Member
  • ***
  • Posts: 125
Re: 87 kx 500
« Reply #23 on: March 16, 2010, 12:53:42 PM »
gave me moly links :lol:
Logged
Pages: 1 [2]   Go Up
« previous next »