Author Topic: Vacuum Testing Tool  (Read 1722 times)

0 Members and 1 Guest are viewing this topic.

Offline blueoval

  • Sr. Member
  • ****
  • Posts: 303
Vacuum Testing Tool
« on: January 18, 2010, 02:41:58 PM »
Any ideas on what to use to plug the intake boot to do a vacuum test.  Larry, I am sure you could make me one, but kind of want it tonight.  Maybe you are burning the midnight oil............and just need another job to do.    Inside diameter is approximately 1.63 inches.     thx ted
If some is good, and more is better, then too much is JUST RIGHT!  B.O.

Offline ShadeTreeFab

  • Full Member
  • ***
  • Posts: 114
Re: Vacuum Testing Tool
« Reply #1 on: January 18, 2010, 02:50:00 PM »
i use a plug you can get from napa auto parts, autozone has them to.

Offline Larry Wiechman

  • Sr. Member
  • ****
  • Posts: 311
Re: Vacuum Testing Tool
« Reply #2 on: January 18, 2010, 02:54:58 PM »

 If you just need to plug it, put a Baggie over the carb spigot and push it in.  :mrgreen:

Offline blueoval

  • Sr. Member
  • ****
  • Posts: 303
Re: Vacuum Testing Tool
« Reply #3 on: January 18, 2010, 02:57:04 PM »
Ok, I made the one for the k5 fit into the boot.  Took some persuading, but it worked.   thx
« Last Edit: January 18, 2010, 03:05:32 PM by blueoval »
If some is good, and more is better, then too much is JUST RIGHT!  B.O.

Offline Larry Wiechman

  • Sr. Member
  • ****
  • Posts: 311
Re: Vacuum Testing Tool
« Reply #4 on: January 18, 2010, 04:28:32 PM »
 
 Violence is always the best answer. :-D
 
Larry