« previous next »
Pages: [1]   Go Down

Author Topic: N82M vs N89D Needles  (Read 2215 times)

0 Members and 1 Guest are viewing this topic.

Offline Kennymac131

  • Jr. Member
  • **
  • Posts: 13
N82M vs N89D Needles
« on: May 19, 2018, 02:44:50 PM »
So I just got my 2001 KX500 and it doesn't run quite right. I haven't even spent enough time on it to describe the issues but I knew it had to be jetted because I was told it was "jetted for colorado" and I'm in mesa AZ.

I figured I would reset and go right to stock (maybe a little lean since its hot out) but the needle is throwing me off a bit here. Does anyone know how the subject needles compare? I have the N89D installed with the clip on the 1st/bottom position. Is this richer or leaner than the stock N82M?

Thanks Ken
Logged

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: N82M vs N89D Needles
« Reply #1 on: May 19, 2018, 03:22:11 PM »
N82M is stock, N89D is richer...
Team Green used the D needle a lot and it will definitely fatten up your mid range.
What altitude do your ride at?
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline Kennymac131

  • Jr. Member
  • **
  • Posts: 13
Re: N82M vs N89D Needles
« Reply #2 on: May 19, 2018, 05:00:33 PM »
Ok that's what I thought.
I ride a couple hundred feet above sea level (glamis)  to ~1500 ft in the Phoenix area. I may go up north 5000+

Thanks!
Logged
Pages: [1]   Go Up
« previous next »