Author Topic: Is there supposed to be a gasket?  (Read 1873 times)

0 Members and 1 Guest are viewing this topic.

Offline blueoval

  • Sr. Member
  • ****
  • Posts: 303
Is there supposed to be a gasket?
« on: December 10, 2009, 02:59:08 PM »
Is there supposed to be a gasket between the reed block and the "piece" that connects to the intake side of the carb?    I don't mean between the reed block and the cylinder, I know there is a gasket there.  Please excuse if I don't know the names of all the parts yet.  thx BO
If some is good, and more is better, then too much is JUST RIGHT!  B.O.

Offline DoldGuy

  • Hero Member
  • *****
  • Posts: 1,198
Re: Is there supposed to be a gasket?
« Reply #1 on: December 10, 2009, 03:03:41 PM »
No, just the rubber intake boot to reed cage.
Its Never too Late to Have a Happy Childhood!

Offline blueoval

  • Sr. Member
  • ****
  • Posts: 303
Re: Is there supposed to be a gasket?
« Reply #2 on: December 10, 2009, 03:07:42 PM »
Thank you for the immediate response.  Appreciate the help as always.  ted
If some is good, and more is better, then too much is JUST RIGHT!  B.O.

Offline BDI

  • Hero Member
  • *****
  • Posts: 1,533
Re: Is there supposed to be a gasket?
« Reply #3 on: December 10, 2009, 03:42:55 PM »
No gasket but I like to use a little sealer there myself. :wink:
Smoke every cigarette like It's your last and ride like you stole something!!!

Offline BDI

  • Hero Member
  • *****
  • Posts: 1,533
Re: Is there supposed to be a gasket?
« Reply #4 on: December 11, 2009, 01:01:50 PM »
You know I thought about it and figured I would add that when I say a little sealer I mean a very little. If you look at the back side of the rubber boot there is a built in O-ring. I take a little case sealer on a peice of card board, then I dab my finger in it lightly and then dab it on the O-ring portion of the rubber boot lightly. You do not need to put a great big bead of rtv on it.
Smoke every cigarette like It's your last and ride like you stole something!!!