Author Topic: wont kickstart will pop start???  (Read 2646 times)

0 Members and 1 Guest are viewing this topic.

Offline 500freak

  • Full Member
  • ***
  • Posts: 53
wont kickstart will pop start???
« on: August 08, 2009, 10:19:52 AM »
i got my new engine started but, it will only pop start. when you pop it, it starts with in a foot of letting the clutch out.
even when it hot, you kick all you get is pops out the exhaust. i took the carb off the 5k i run every day so that has to be ok. (that bike starts one or two kicks every time). timing is alittle advanced. the compression is high so could it be it needs VP?? when its running it perfect wheeling in every gear. idles fine quick crisp revs, im lost.
87 k5 Pc pipe,v-f3,pwk....SOLD!!
87 k5 stage 3 port,torque spacer 39.5mm carb,gnarly pipe,vf reeds,uni filter,bored 86.5
99 banshee 421 stroker beast!!!
75 dt400 all stock SOLD!
85 kx125 stock

Offline BDI

  • Hero Member
  • *****
  • Posts: 1,533
Re: wont kickstart will pop start???
« Reply #1 on: August 08, 2009, 01:39:02 PM »
I would try a cdi from a known running bike. Just fir s**ts and giggles
Smoke every cigarette like It's your last and ride like you stole something!!!

Offline kaw rider

  • Hero Member
  • *****
  • Posts: 1,218
  • Cool your engine with water not fuel
Re: wont kickstart will pop start???
« Reply #2 on: August 08, 2009, 04:32:17 PM »
I would check your flywheel keyway.

Offline BDI

  • Hero Member
  • *****
  • Posts: 1,533
Re: wont kickstart will pop start???
« Reply #3 on: August 08, 2009, 05:12:44 PM »
I would check your flywheel keyway.
I was thinking the same thing but i figured if the guy has been playing with the timing that he would have had to pull the flywheel to do it. I would assume that he would have noticed that the key was sheered. the key is typicaly what causes this problem.
Smoke every cigarette like It's your last and ride like you stole something!!!

Offline toomany

  • Full Member
  • ***
  • Posts: 50
Re: wont kickstart will pop start???
« Reply #4 on: August 09, 2009, 07:03:24 PM »
I would check your flywheel keyway.
I was thinking the same thing but i figured if the guy has been playing with the timing that he would have had to pull the flywheel to do it. I would assume that he would have noticed that the key was sheered. the key is typicaly what causes this problem.

If it's the 87 in his sig....you can adjust the timing without pulling the flywheel. 87's have the small flywheel on them.