Author Topic: 91 KX5 Rear shock  (Read 1966 times)

0 Members and 1 Guest are viewing this topic.

Offline 95formula847

  • Full Member
  • ***
  • Posts: 172
91 KX5 Rear shock
« on: July 02, 2009, 04:08:01 PM »
I took my bike to the shop i work at today. I put 400 psi of nitrogen in it and its def alot better than when it was empty. How high should the bike sit stock? Like top of rear tire to fender? How much should it drop with a rider on it? I weigh 200 lbs.
1991 KX500
2003 ZX12R

Offline Hillclimb#42

  • Hero Member
  • *****
  • Posts: 991
  • '97 kx 500, '96 kx 250, '99 KTM 380
Re: 91 KX5 Rear shock
« Reply #1 on: July 02, 2009, 11:17:39 PM »
Search for "Sag" topic covered by Paul. Its a very good write-up.

Offline Danger4u2

  • Administrator
  • Hero Member
  • *****
  • Posts: 1,616
  • KX500 is Danger4u2 Returning from light speed pic.
    • KXRiders.com
Re: 91 KX5 Rear shock
« Reply #2 on: July 02, 2009, 11:52:52 PM »
I bought one of these, makes it easy.  You don't have to have this tool.

http://www.asvinventions.com/SAG_Scale/

Pauls:  http://www.kxriders.com/forums/index.php/topic,563.0.html

(Set your race sag 1st - Then check static sag)
http://www.tootechracing.com/suspension_tips.htm

DETERMINING THE PROPER REAR SHOCK SPRING RATE
http://www.tootechracing.com/Static%20Sag%20Suspension%20Tip.htm

This company has lots of info, home page.
http://www.tootechracing.com/Home%202nd.htm
« Last Edit: July 03, 2009, 12:36:01 AM by Danger4u2 »
KX 500 Rider