« previous next »
Pages: [1]   Go Down

Author Topic: Same old stuff ?? Jetting  (Read 1841 times)

0 Members and 1 Guest are viewing this topic.

Offline Just an old rider

  • Jr. Member
  • **
  • Posts: 29
Same old stuff ?? Jetting
« on: January 04, 2010, 03:26:57 PM »
  Ok it is not for my recently rebuilt kx125 that just now seized after 3 hrs riding...but it is for a yz and ktm 125 my sons have  Both bikes have a nasty studder-or choking out at low rpm ..and want to foul plugs quickly... how can I lean out the carb so the boys don't have to be on the stick all the time ??/ 
Logged

Offline hughes

  • Hero Member
  • *****
  • Posts: 1,923
    • Dirt Hammers
Re: Same old stuff ?? Jetting
« Reply #1 on: January 06, 2010, 07:31:51 AM »
What year are the bikes? A high hr bike could use a float height check before making any jetting adjustments. Maybe worn needle / seat area.
Logged
Open Class 2-Stroke Kawasaki KX500
Yamaha 2005 YZ250
Richard Hughes
Dirt Hammers - Online Off-Road Journal
hughes@dirthammers.com
http://www.dirthammers.com

Offline Friar-Tuck

  • Hero Member
  • *****
  • Posts: 1,827
  • \o/ Live Free or Die
Re: Same old stuff ?? Jetting
« Reply #2 on: January 06, 2010, 09:34:57 AM »
 JANO-Rider
  I'm sure there is some other info the guys might like to have before throwing some suggestions out there. 
   Air filter clean, Fresh fuel & Octane rating, Fuel/Oil Ratio, last top end service, Reeds, Weather, Altitude, has carb been cleaned, etc.
  Tuck\o/
   
Logged
"The Truth Has No Agenda"
Pages: [1]   Go Up
« previous next »