« previous next »
Pages: [1]   Go Down

Author Topic: Trippleclamps  (Read 1927 times)

0 Members and 1 Guest are viewing this topic.

Offline doordie

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 775
  • Do or Die.....
Trippleclamps
« on: April 19, 2009, 06:07:36 AM »
If you have a old fork of Kayaba 43mm (blue) for a KX500(92-94),you can change to KX250(92-94) trippleclamp and get 3mm less offset and
win sharper cornering abillity.
You have to use KX500 steem and make a new spacer to reduce diameter of hole in upper trippleclamp.
Pic show old KX500 lower trippleclamp with a KX250 upper trippleclamp on top! :wink:
This solution will turn my old SM-bike KX500 to a cornerwinner for sure.... 8-)
« Last Edit: April 19, 2009, 06:13:53 AM by doordie »
Logged
Iceroad champion 2006,still 2007,even 2008 without a single race!

Offline cr37

  • Jr. Member
  • **
  • Posts: 35
Re: Trippleclamps
« Reply #1 on: April 19, 2009, 11:10:12 AM »
Shorter dog bones help alot.
Logged

Offline DoldGuy

  • Hero Member
  • *****
  • Posts: 1,198
Re: Trippleclamps
« Reply #2 on: April 22, 2009, 01:49:19 PM »
Doordie,
Have you measured how much it pulls the front axle back compared to the stock offset?? I have always wanted more frontend "Bite" out of the KX. I bought a set of clamps with 1/2 degree less rake and it made a very small difference (axle distance 1/2 inch shorter measured axle to axle). As CR37 said, the Dog Bones have made the biggest difference for me, used the Pro Circuit (1mm shorter) and the Devol (adjustsable +1,0,-1,-2).
Logged
Its Never too Late to Have a Happy Childhood!
Pages: [1]   Go Up
« previous next »