« previous next »
Pages: [1]   Go Down

Author Topic: 1986 / 87 KX500 electrics  (Read 3877 times)

0 Members and 1 Guest are viewing this topic.

madmcnish

  • Guest
1986 / 87 KX500 electrics
« on: January 09, 2009, 02:14:51 AM »
Hi there,
My KX500 (1987 motor in '86 rolling chassis) has started running rough (blubbering and cutting out) and I think it might be the CDI unit.
The engine has recently been rebuilt and was running fine.
I've checked it over and everything seems OK mechanically.
During the rebuild, the stator and coil were replaced and the plug is also good, but the spark is pretty weak which leads me to think that the CDI may be on the way out.
The stator voltages were all checked-out and were OK after the rebuild.
Does anyone have an idea if the CDI from different years will fit the '87 motor?
Any ideas to what else could be causing the rough running?
Thanks in advance for any advice.
Cheers,
MadMcNish 
Logged

Offline Johnniespeed

  • Hero Member
  • *****
  • Posts: 575
  • The Thrill of Speed overcomes the fear of Death.
Re: 1986 / 87 KX500 electrics
« Reply #1 on: January 09, 2009, 02:59:12 AM »
 Mad, rather than spending a lot of money on parts you may not need, why dont you ask the members here if they would put your suspect CDI unit on thier good running bike to test your CDI unit ? 
  If a good running bike still runs good with your CDI then your CDI is not to blame.
  Now who has a good running 86/87 ?
  John
Logged
Spring is here and the Mighty 500 wants to ride.
 2004 KX500 E16
 Michigan has the best groomed and mapped trail system, check out the Cycle Conservation Club of Michigan trail maps.

Offline Hillclimb#42

  • Hero Member
  • *****
  • Posts: 991
  • '97 kx 500, '96 kx 250, '99 KTM 380
Re: 1986 / 87 KX500 electrics
« Reply #2 on: January 09, 2009, 03:00:55 AM »
When did it start running bad. Right when you got it back together? or well after break-in? How are you telling it has a weak spark? It was hard for me to test when having a firing issue with an old '85 125, I worked on. The best way I found was to remove plug, put it into the wire, and kick. The compression kept me from kicking fast enough to get a good spark. The spark was never bright and scary like a car's spark, either. I also read, you should always have a plug in it when testing. Without the resistance of the plug, you can damage the CDI. Also, sometimes a weak spark is a result of a weak ground connection. You might remove the Cdi, or coil, clean mounting area and re-install. The reason I asked about when it started messin' up, is that when a motor is getting worn, it usually needs fattened up with jetting. After a fresh top-end, it would be rich. You say plug looks good, so that may not be it, but how does plug reading get affected by weak spark? Where is it blubbering? All the time? Bottom rpm range, mid, top? Have you inspected the reeds?
Don46 would be a great guy to ask. He has reverse Alzheimers and can rattle off a bunch of spec.s on that kinda stuff. I guess he has trouble with yesterday, but is like an owner's manual for any bike he has owned.
« Last Edit: January 09, 2009, 03:09:33 AM by Hillclimb#42 »
Logged

Offline hughes

  • Hero Member
  • *****
  • Posts: 1,923
    • Dirt Hammers
Re: 1986 / 87 KX500 electrics
« Reply #3 on: January 09, 2009, 06:16:28 AM »
My 87 did the same thing and I found that my plug wire was damaged. What I mean by damage is that the plug caps threads onto the plug wire and the end of the plug wire was worn out you could almost pull the plug cap off the plug wire by hand. I trimmed about 1/4 off the plug wire and threaded the cap back on. It almost acted like a plug fouling out. Might not be your problem but it's easy to check and see.
Logged
Open Class 2-Stroke Kawasaki KX500
Yamaha 2005 YZ250
Richard Hughes
Dirt Hammers - Online Off-Road Journal
hughes@dirthammers.com
http://www.dirthammers.com

Offline don46

  • Hero Member
  • *****
  • Posts: 1,140
Re: 1986 / 87 KX500 electrics
« Reply #4 on: January 09, 2009, 05:37:07 PM »
A cdi from a 86, 87, 88, or 89 will work. or you can put a whole 90 or newer ignition system
Logged
Live today, for tomorrow may never come

Offline nd4speed

  • Full Member
  • ***
  • Posts: 53
Re: 1986 / 87 KX500 electrics
« Reply #5 on: January 09, 2009, 11:14:26 PM »
CDIs rarely go bad.
Logged

Offline kwakman

  • Hero Member
  • *****
  • Posts: 879
  • Kwikasfuki KX500
Re: 1986 / 87 KX500 electrics
« Reply #6 on: January 10, 2009, 01:50:07 AM »
mad,
      where in the world are you? my 86 ate a cdi and then a secondhand cdi, and when Kawasaki said ?200 (us$350ish) i found a company which do replacements of good quality from a uk company called West Country Windings for ?89. cant find phone number at minute but a websearch should find 'em.price for 86 might vary slightly as I run a 90 - 93 ignition setup. HTH.
Logged
And lo, I did loft the front wheel and carried it forth to the unbelievers, and cast it down before them and said unto them ''look now upon the might of my throttle control ye pitiful cretinous ones''
And the unbelievers did quake in their boots....

madmcnish

  • Guest
Re: 1986 / 87 KX500 electrics
« Reply #7 on: January 12, 2009, 12:37:31 AM »
Electrics are OK.
Crank seals have blown!
Logged

Offline 2 smoke juan

  • Jr. Member
  • **
  • Posts: 31
Re: 1986 / 87 KX500 electrics
« Reply #8 on: January 12, 2009, 10:37:32 AM »
 :-o Unlucky McNish

Good to see you made it over from the Scottish forum  :wink:

Sure you'll be spending a lot more time on here - it's an unbeleivable resource for the Green.....

I'm in the 125/250 forum though, no K5 in my garage yet....

Take it easy

Ewan
Logged
Pages: [1]   Go Up
« previous next »