« previous next »
Pages: [1]   Go Down

Author Topic: Clutch cables  (Read 18300 times)

0 Members and 1 Guest are viewing this topic.

Offline b4himdude

  • Sr. Member
  • ****
  • Posts: 275
  • You gotta love to tinker
Clutch cables
« on: August 30, 2016, 02:42:07 AM »
Maybe it's just the brand clutch cables I've bought. or maybe, it's the same with all of them. But why is it( even with brand spanking new steel and fiber plates) that the cable adjustment once adjusted for proper engage and disengagement is so close to the adjustment limits. I don't know that routing the cable would make any difference because it's right where it should be and doesn't have any kinks or tight spots when I turn or otherwise. Is that common with all new clutch cables? Or is there a brand out there that gives the rider more life on his cable with an adjustment that isn't 80 or 90% spent right off the git go?
« Last Edit: August 30, 2016, 05:14:35 AM by b4himdude »
Logged
hell ,i,m so broke . if it cost a nickle to take a s**t, id have to puke.....

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: Clutch cables
« Reply #1 on: August 30, 2016, 06:18:01 AM »
is it an aftermarket cable?
I've found going with OEM cables is by far the best choice.
Logged
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline b4himdude

  • Sr. Member
  • ****
  • Posts: 275
  • You gotta love to tinker
Re: Clutch cables
« Reply #2 on: August 30, 2016, 01:26:23 PM »
They are tusk cables. I don't know how 0.e.m  they are. but next set I'll do some more informed shopping and make sure I follow your recommendations. Thanx mr.  4 beaver
Logged
hell ,i,m so broke . if it cost a nickle to take a s**t, id have to puke.....

Offline ewilly

  • Jr. Member
  • **
  • Posts: 13
Re: Clutch cables
« Reply #3 on: August 02, 2019, 03:55:58 PM »
Yes I noticed the same thing with my new bike to me KX5.  Going to extend the arm at case to make pull easier.
Logged

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: Clutch cables
« Reply #4 on: August 04, 2019, 02:49:10 AM »
OEM clutch cable all the way,
Not only do they last longer, but they have the lightest pull...

I stopped using aftermarket cables a while back but I had no fitment issues.
If your inner clutch hub or pressure plate is worn that can cause your cable to be out of wack.
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline dave916

  • Hero Member
  • *****
  • Posts: 546
Re: Clutch cables
« Reply #5 on: August 07, 2019, 08:35:31 AM »
oem cable  {has swivel ends}/ new needles bearings  in clutch arm,  one finger pull  all day/ even work it wiht baby finger :-D
Logged
Pages: [1]   Go Up
« previous next »