« previous next »
Pages: [1]   Go Down

Author Topic: Crazy Question  (Read 1865 times)

0 Members and 1 Guest are viewing this topic.

Offline TOF64

  • Newbie
  • *
  • Posts: 4
Crazy Question
« on: July 30, 2008, 05:00:08 AM »
Is it possible or a good idea to change fork springs on an 01 500 without changing the fork oil?  I need to swap out spring, but the forks were serviced 4 weeks ago with no ride time.  Bushings, seals, and oil at that time.  Looking at the manual I thought this might be possible?
Logged

Offline Platypus

  • Full Member
  • ***
  • Posts: 157
    • Platypus Racing
Re: Crazy Question
« Reply #1 on: July 30, 2008, 05:49:33 AM »
You will end up taking a lot of oil along with those springs so you would need to top off to correct level.
Logged

Offline Danger4u2

  • Administrator
  • Hero Member
  • *****
  • Posts: 1,616
  • KX500 is Danger4u2 Returning from light speed pic.
    • KXRiders.com
Re: Crazy Question
« Reply #2 on: July 30, 2008, 07:23:15 AM »
Change oil. You will spend less than $10 for peace of mind.
Logged
KX 500 Rider

Offline KXcam22

  • Hero Member
  • *****
  • Posts: 1,677
Re: Crazy Question
« Reply #3 on: July 30, 2008, 07:26:23 AM »
I have done it with no issues.  You just need to make sure that as much oil as possible has dripped off the springs.  Usually this is only a few CC'c. While the springs are out you might want to verify the oil level. Cam.
Logged

Offline KX500freak

  • Hero Member
  • *****
  • Posts: 1,028
  • KX500 - Have a Wheelie good weekend
Re: Crazy Question
« Reply #4 on: July 30, 2008, 07:28:43 AM »
tip!

let it drip in a clear bottle with cc markers ,like the ones in yall kitchens .
then verify and level both contents before pooring it back in

my 2 cents :wink:
Logged
Dutch Team Green 91-94-01 KX500
Pages: [1]   Go Up
« previous next »