« previous next »
Pages: [1]   Go Down

Author Topic: Fork Tube Height  (Read 2380 times)

0 Members and 1 Guest are viewing this topic.

Offline serafin

  • Full Member
  • ***
  • Posts: 161
Fork Tube Height
« on: December 04, 2007, 04:53:36 PM »
What Fork Tube Height are you running and how are you measuring it?  Base of top clamp to top of fork cap? Or Base of top clamp to top of fork tube?

Serafin
Logged

js

  • Guest
Re: Fork Tube Height
« Reply #1 on: December 04, 2007, 05:49:02 PM »
http://www.tonyfoale.com/book/index.htm
take a look at this website
read the book and you'll understand the 40 things that happen when you change the fork tube height.
Logged

Offline serafin

  • Full Member
  • ***
  • Posts: 161
Re: Fork Tube Height
« Reply #2 on: December 05, 2007, 04:18:14 AM »
Interesting reading.  I was just interested in what other riders on this site are using.  Right now I using the stock setting per the owners manual. 

serafin
Logged

Offline KXcam22

  • Hero Member
  • *****
  • Posts: 1,677
Re: Fork Tube Height
« Reply #3 on: December 05, 2007, 05:01:48 AM »
I run my tubes 1cm up in the clamps for tighter turning. Cam.
Logged

crusty

  • Guest
Re: Fork Tube Height
« Reply #4 on: December 05, 2007, 05:17:23 AM »
top of tube to clamps should run around 1/8th to 3 16 of an inch
Logged

moburki

  • Guest
Re: Fork Tube Height
« Reply #5 on: December 05, 2007, 06:45:13 AM »
I run top of tripple clam to first line on fork...aprox 1cm drop iirc. A little easier turn in on single track.
Logged

Offline kx666

  • Sr. Member
  • ****
  • Posts: 352
Re: Fork Tube Height
« Reply #6 on: December 05, 2007, 05:44:55 PM »
the factory has marks ware to position the tubes... i know that a slight change makes huge handleing differences but i dont know enough about it yet.
Logged
Pages: [1]   Go Up
« previous next »