« previous next »
Pages: [1]   Go Down

Author Topic: VFORCE 3 Reed Cage  (Read 3918 times)

0 Members and 2 Guests are viewing this topic.

Offline BigGreenMachine

  • Sr. Member
  • ****
  • Posts: 284
VFORCE 3 Reed Cage
« on: March 14, 2007, 01:04:57 PM »
Wondering does the 250 cage work? Was thinking of just putting in carbon reeds and calling it a day.

How much of a gain would the VFORCE give me? Worth it?
Logged

Offline doordie

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 775
  • Do or Die.....
Re: VFORCE 3 Reed Cage
« Reply #1 on: March 16, 2007, 02:39:34 AM »
Yes,Vforce3 for KX250 works just fine! :wink:
Very easy to get perfect fit between cage and manifold ?cause
you can "disambly" it and trim it very easy with dremel and devcon. :evil:

I will put my bikes on dyno soon and compare what combo(pipe/intake) does what for power and powerband. 8-)

Pipes:stock,shorted stock,SPES,PC and DOMA.
Intake:stock,modified stock,Boysen,Vforce,Vforce2 and Vforce3.
and then stock carb,modified stock 41mm and Lectron 44mm.
Even what Powerblade and Reedspacer does.
« Last Edit: March 16, 2007, 02:45:26 AM by doordie »
Logged
Iceroad champion 2006,still 2007,even 2008 without a single race!

Offline doordie

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 775
  • Do or Die.....
Re: VFORCE 3 Reed Cage
« Reply #2 on: March 25, 2007, 06:00:38 AM »
Here is a Vforce3.
Logged
Iceroad champion 2006,still 2007,even 2008 without a single race!

Offline BigGreenMachine

  • Sr. Member
  • ****
  • Posts: 284
Re: VFORCE 3 Reed Cage
« Reply #3 on: March 25, 2007, 08:11:34 AM »
Good stuff DoOrDie. What setup makes the most power?

Any comments on the OEM '88 PWK 39mm carb?
Logged

Offline 3Razors

  • Full Member
  • ***
  • Posts: 109
Re: VFORCE 3 Reed Cage
« Reply #4 on: January 05, 2008, 09:15:21 AM »
Im curious, for anyone that is running the v-force 3 how many reed petals does it have?  From the pics i've seen they all look like they have 8?  I know the v-force 2 has 12 petals.
Logged

Offline kaw rider

  • Hero Member
  • *****
  • Posts: 1,218
  • Cool your engine with water not fuel
Re: VFORCE 3 Reed Cage
« Reply #5 on: January 05, 2008, 01:55:23 PM »
razor
you are correct. 8

base on my dyno pulls this month i would say.
v-2 mid topend great power w/right intake porting.
v-3 good midrange power
Logged

Offline 3Razors

  • Full Member
  • ***
  • Posts: 109
Re: VFORCE 3 Reed Cage
« Reply #6 on: January 05, 2008, 05:03:11 PM »
Good info., thanks!  I was debating which one to get for my KX and was looking for more mid to topend punch, so I will likely go for the V2.

By chance how much more hp did it make over stock? I'm guessing 2 maybe 3 hp?
« Last Edit: January 05, 2008, 05:05:42 PM by 3Razors »
Logged

Offline kaw rider

  • Hero Member
  • *****
  • Posts: 1,218
  • Cool your engine with water not fuel
Re: VFORCE 3 Reed Cage
« Reply #7 on: January 05, 2008, 06:21:56 PM »
do a search for stewart. i think that some about right.
Logged

Offline Rotorised

  • Full Member
  • ***
  • Posts: 63
Re: VFORCE 3 Reed Cage
« Reply #8 on: January 09, 2008, 02:12:25 PM »
Hey guys I have the v-force 3 too and have allways chucked out the little black insert that seems to block flow. I was wondering has anyone tried grinding the bulk of the insert out so that it is the same diameter as the carby boot but still directs air in the reeds smoothly? Sorry if that is a bit ambiguouse lol
Logged

Offline doordie

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 775
  • Do or Die.....
Re: VFORCE 3 Reed Cage
« Reply #9 on: January 20, 2008, 07:12:02 AM »
Quote from: Rotorised on January 09, 2008, 02:12:25 PM
Hey guys I have the v-force 3 too and have allways chucked out the little black insert that seems to block flow. I was wondering has anyone tried grinding the bulk of the insert out so that it is the same diameter as the carby boot but still directs air in the reeds smoothly? Sorry if that is a bit ambiguouse lol
Yes,it?s a flowresistant there and you can snappit apart and grind/trim it. :wink:
You can also use JB-weld to increased flow in Vforce2 at right side of inletboot,be sure it?s very clean before you attach it only. :wink:
Logged
Iceroad champion 2006,still 2007,even 2008 without a single race!

Offline joker_fly

  • Jr. Member
  • **
  • Posts: 31
Re: VFORCE 3 Reed Cage
« Reply #10 on: January 22, 2008, 04:44:04 AM »
Does any one have any pic?s of the modifcations done to the reed inlet

 And how do i get the inlet lose from the cage ?

Logged
Pages: [1]   Go Up
« previous next »