The current CR setup
is two yellows out ,on the lighting coil output side, AC.
its a *true 130 watts* (not split) system.
it is availible with either a DC regulator,(if you want it with a battery application) or AC regulator.
it works well in both applications
It runs with a DC reg and battery , on our CR500AFX..
(since the bike already has the batt,and batt box)
however I have run it AC, on a standard CR500AF, CR500R,
and it never dims with your somewhat typical 55wat headlight bulb even at idle, it is full bright..
of course with a higher wattage bulb that might change ...
havnt tested that yet.
but as mentioned you could always run the DC regulator ,
and a small batt if wanted , or needed?
on the CDI mapping ,
it is not progamable.. but i was thinking of having
it be swicthable, and offer two curves
the flywheel is 4 oz heavier
The KX system isnt designed yet, but would mimic the CR setup.