Author Topic: Just got a '03 KX250  (Read 8232 times)

0 Members and 1 Guest are viewing this topic.

Mudshark

  • Guest
Just got a '03 KX250
« on: November 08, 2006, 11:14:24 AM »
Just got this:



It has:
PC Works Pipe
FMF Shorty
V-Force reeds
Racetech springs all round

The motor sounds good and pulls really hard.
I hope to convert it for bush duty and have ordered the following list of stuff.

Kawasaki Shop manual  :-D
Clarke 3.x gallon tank (Natural)
Acerbis Rally hand guards
MSR full Skid plate (the PC pipes bottom mount gets in the way, I'll have to mod it)
Promoto billet Kick stand
MSR Rear Rotor protector
Stealthy Flywheel weight

While I was at it, I got new chain and sprockets, chain rollers, fork guards
and handlebars.

I want to get a Gnarly for it to boost to bottom end, But figured I'd try it out
like this for now and see how it goes.
I intend a full strip down and re-build of the bike before use.
What else is there that I'm not thinking of?

Offline MadKaw

  • Hero Member
  • *****
  • Posts: 659
Re: Just got a '03 KX250
« Reply #1 on: November 12, 2006, 04:50:22 PM »
sounds like you got a handle on it. that should be a fun ride. where you at in Texas? maybe we could meet up and ride.
Deviate from the Norm!
Father!...The sleeper has Awaken!!!

2001 Harley Sportster xlh1200
'73 Suzuki GT550
'75 Suzuki GT550
'74 Kawasaki Z1 900
'79 Yamaha GT80
'93 KX500*******
'84 Yamaha Riva 180z scooter
08 Q-link Pegasus scooter first new rid

Mudshark

  • Guest
Re: Just got a '03 KX250
« Reply #2 on: November 13, 2006, 02:49:09 PM »
sounds like you got a handle on it. that should be a fun ride. where you at in Texas? maybe we could meet up and ride.

I'm in Frisco, just North of Dallas.
I have already started the strip down, here's a thread of how it's going:
http://www.twtex.com/forums/showthread.php?t=13560

BTW, if youre not a member of TWT, and you live in Texas... you have to
join up. Lots of local content.

Offline MadKaw

  • Hero Member
  • *****
  • Posts: 659
Re: Just got a '03 KX250
« Reply #3 on: November 13, 2006, 04:14:24 PM »
I'm in Waxahachie, just South of Dallas. and no, I hadn't seen that twtex.com before, I'll have to check that out. man did you ever tear down that bike! mine is in the hospital right now seeing how bad I blew it up. crashed on a table top and it layed on its side with the throttle dug in the mud runnin WFO. compression now at 50psi. time to work some overtime. looks like yours is gonna be sweet though. can't wait to see pics when she's all put back together again.
Deviate from the Norm!
Father!...The sleeper has Awaken!!!

2001 Harley Sportster xlh1200
'73 Suzuki GT550
'75 Suzuki GT550
'74 Kawasaki Z1 900
'79 Yamaha GT80
'93 KX500*******
'84 Yamaha Riva 180z scooter
08 Q-link Pegasus scooter first new rid

Mudshark

  • Guest
Re: Just got a '03 KX250
« Reply #4 on: November 14, 2006, 12:29:16 PM »
Waxahachie... cool, so we're not that far from each other. A ride is not
out of the question.  :-D
Sorry to hear about the crash... hard wipe outs suck.
I'll keep the thread updated with progress on the bike. Keep us posted on how
yours is doing as well.
When everything / one is fixed we need to find a track / place to ride between us
somewhere. I can get at least 3 or 4  guys from around here to join in as well.

Offline Danger4u2

  • Administrator
  • Hero Member
  • *****
  • Posts: 1,616
  • KX500 is Danger4u2 Returning from light speed pic.
    • KXRiders.com
Re: Just got a '03 KX250
« Reply #5 on: November 14, 2006, 01:16:19 PM »
Mudshark and MadKaw,  Dallas isn't that far from OKC.  Lake Murray ORV park is about half way between us.

Most riders agree the fee is worth the improvements that have been made to the park. ?This is one of the best parks we?ve found in all the parks we go to,? say Brad and Rhonda Herman from Tyler, Texas. ?The thing about the state parks is the reasonable fee so you can enjoy the land at a fair price.?

The Lake Murray ORV area is located four miles east of I-35 (two miles east of the park entrance) off SH-70. For park information, call 580-223-4044.  http://www.travelok.com/atv/off-road.asp

Here's my quad after riding at Murray after a good rain.  Found a deep mud hole and it stoped the quad and over the bars I went.

Maybe we can meet there sometime.
Danger

KX 500 Rider

Offline MadKaw

  • Hero Member
  • *****
  • Posts: 659
Re: Just got a '03 KX250
« Reply #6 on: November 14, 2006, 03:51:28 PM »
d**n!!! you really sunk that baby in didn't you. that park sounds cool. there is also supposed to be one in meunster just south of the Ok. border. I ussually ride in Corsicana at Motoextreme, or at Buffalo creek in Canton, just East of Dallas~an hour east on Hwy. 20( a 2 mile mx track thats freakin awsome!) I'm all for a trip though for a good ride/weekend.
Deviate from the Norm!
Father!...The sleeper has Awaken!!!

2001 Harley Sportster xlh1200
'73 Suzuki GT550
'75 Suzuki GT550
'74 Kawasaki Z1 900
'79 Yamaha GT80
'93 KX500*******
'84 Yamaha Riva 180z scooter
08 Q-link Pegasus scooter first new rid

Offline kx666

  • Sr. Member
  • ****
  • Posts: 352
Re: Just got a '03 KX250
« Reply #7 on: November 14, 2006, 06:10:42 PM »
Ih ave a good story about sinkingbikes.
last weekend i went ridding (in WA we had about 5-13" of rain in 3 days) i  was WOT in 5th attempting to cross a puddle that was about 80 or 90 ft long and about a foot or so deep.
i didnt know a bout a large rock in the puddle...
i got wet really quick. my buddy saw the whole thing. still a little sore, but it was fun

Offline MadKaw

  • Hero Member
  • *****
  • Posts: 659
Re: Just got a '03 KX250
« Reply #8 on: November 14, 2006, 10:29:24 PM »
Ouch! beware of hidden rocky things...mine like that was a tree root, flew over the bars like superman...not as gracefull a landing though. :-o
Deviate from the Norm!
Father!...The sleeper has Awaken!!!

2001 Harley Sportster xlh1200
'73 Suzuki GT550
'75 Suzuki GT550
'74 Kawasaki Z1 900
'79 Yamaha GT80
'93 KX500*******
'84 Yamaha Riva 180z scooter
08 Q-link Pegasus scooter first new rid

Offline Danger4u2

  • Administrator
  • Hero Member
  • *****
  • Posts: 1,616
  • KX500 is Danger4u2 Returning from light speed pic.
    • KXRiders.com
Re: Just got a '03 KX250
« Reply #9 on: November 15, 2006, 02:12:22 AM »
kx666, my Aunt and Uncle live in Ocean Park south west corner by Oregon so I heard about the rain plus it made the national news.  I'm from Washington, grew up in Aberdeen then Battle Ground.  We moved to Oklahoma when I was 9, 40 years ago.  Been back many times, and each time it's harder to come back to Oklahoma.
KX 500 Rider

Offline MadKaw

  • Hero Member
  • *****
  • Posts: 659
Re: Just got a '03 KX250
« Reply #10 on: November 15, 2006, 01:01:52 PM »
beautiful up there, for sure. well sharky, looks like we'll see which 1 of us gets our bike together first...then we'll take these little newborns out for a cherry popping ride!
Deviate from the Norm!
Father!...The sleeper has Awaken!!!

2001 Harley Sportster xlh1200
'73 Suzuki GT550
'75 Suzuki GT550
'74 Kawasaki Z1 900
'79 Yamaha GT80
'93 KX500*******
'84 Yamaha Riva 180z scooter
08 Q-link Pegasus scooter first new rid

Mudshark

  • Guest
Re: Just got a '03 KX250
« Reply #11 on: November 19, 2006, 12:36:25 PM »
 :-D hehe! the race is on !
The "rebuild" suffered a bit today when I discovered that the axle lock bolts
on the fork bottoms were stripped (2 of 4) After tapping to a larger size and
replacing the bolts the rebuild continued. It's starting to look like a bike again.
« Last Edit: November 19, 2006, 12:38:17 PM by Mudshark »

Offline MadKaw

  • Hero Member
  • *****
  • Posts: 659
Re: Just got a '03 KX250
« Reply #12 on: November 19, 2006, 03:05:50 PM »
she's lookin good man. gonna be doin a total rebuild on my engine... :cry: but its gonna be better than it was before...stronger...faster...we have the technology 8-) gonna cost me about a grand to get her done, wish I could do the work myself. never been into a moto motor before though. nervous about getting it together and then having to redo it. but man yours is coming together nice. that frame looks good. would like to do a frame up on mine. I did find a brand new 2001 kx250 at a dealership though. would like to buy it and use mine as a parts bike, but don't tell it I said that!
Deviate from the Norm!
Father!...The sleeper has Awaken!!!

2001 Harley Sportster xlh1200
'73 Suzuki GT550
'75 Suzuki GT550
'74 Kawasaki Z1 900
'79 Yamaha GT80
'93 KX500*******
'84 Yamaha Riva 180z scooter
08 Q-link Pegasus scooter first new rid

Mudshark

  • Guest
Re: Just got a '03 KX250
« Reply #13 on: November 19, 2006, 03:32:17 PM »
Thanks MadKaw, I'm planning a motor rebuild next year also.
I'm planning to replace the:
Jug
Whole Crank / bottom end assembly.
Piston / rings / small end
My boar is ruined, the previous owner let a bunch of sand in through the air filter.
anyhow, it'll still do for a few more months  :-D
But because of the sand, I'm replacing it all. Oh yes, I'll trade in the Pro Circuit Works pipe for a
Gnarly for the woods.  :wink:
I'm still waiting for the rear end bearings, clutch cable and silencer packing to arrive next week,
then I can finish off the build.

Offline MadKaw

  • Hero Member
  • *****
  • Posts: 659
Re: Just got a '03 KX250
« Reply #14 on: November 20, 2006, 04:26:33 PM »
sounds likethe same thing I'm having to do now. crank, rod, piston, replating the cylinder. its a total frankenstien job. I think I could do the frame up thing later, but I'm not messin with the engine. :roll:
Deviate from the Norm!
Father!...The sleeper has Awaken!!!

2001 Harley Sportster xlh1200
'73 Suzuki GT550
'75 Suzuki GT550
'74 Kawasaki Z1 900
'79 Yamaha GT80
'93 KX500*******
'84 Yamaha Riva 180z scooter
08 Q-link Pegasus scooter first new rid