Author Topic: Expandable Foam  (Read 2554 times)

0 Members and 1 Guest are viewing this topic.

Offline BigGreenMachine

  • Sr. Member
  • ****
  • Posts: 284
Expandable Foam
« on: October 09, 2006, 12:56:57 AM »
Looking to do this trick and need to know the kinda foam to use. Would MONO foam work you think?

James

Offline demographic

  • Hero Member
  • *****
  • Posts: 825
Re: Expandable Foam
« Reply #1 on: October 09, 2006, 05:43:33 AM »
Errrr, care to elaborate on its intended use?
That ones a bit cryptic for me :?

Offline BigGreenMachine

  • Sr. Member
  • ****
  • Posts: 284
Re: Expandable Foam
« Reply #2 on: October 09, 2006, 07:05:40 AM »
Errrr, care to elaborate on its intended use?
That ones a bit cryptic for me :?

OK well MONO is the brand name of the foam and its basicly used to seal cracks from air leaks. It expands in the cracks. What I want to know is would it be suitable as a vibration killer inside the frame of my trike once the 500 is installed.

Sorry for the confusion.

James

Offline demographic

  • Hero Member
  • *****
  • Posts: 825
Re: Expandable Foam
« Reply #3 on: October 09, 2006, 08:13:37 AM »
Do you mean the squirty builders foam that expands in gaps.
Often used to stiffen up round doorframes?

I have heard of someone usingh it in their handlebars to dampen vibrations down but personally have never tried it myself.

Good luck anyway regards Scott.

Offline Arigato

  • Hero Member
  • *****
  • Posts: 516
Re: Expandable Foam
« Reply #4 on: October 09, 2006, 09:55:51 AM »
My brother put it in the frame of his Aluminum CR500 and says it makes a difference.   I don't know what brand of foam it is though.

Offline Johnniespeed

  • Hero Member
  • *****
  • Posts: 575
  • The Thrill of Speed overcomes the fear of Death.
Re: Expandable Foam
« Reply #5 on: October 09, 2006, 11:25:09 AM »
 I read on a Red Bike forum about the foam trapping moisture in the frame and causing
corosion problems.   Just something else to consider before trying this.
Spring is here and the Mighty 500 wants to ride.
 2004 KX500 E16
 Michigan has the best groomed and mapped trail system, check out the Cycle Conservation Club of Michigan trail maps.

Offline BigGreenMachine

  • Sr. Member
  • ****
  • Posts: 284
Re: Expandable Foam
« Reply #6 on: October 10, 2006, 07:42:07 AM »
Arigato, thanks for the info. I have a chunk of that MONO foam I nabbed off the shed wall a few seconds ago. Its pretty solid and seems like it would absorb a lot of vibration.

I know my 250 Tecate (no counterballancer) would rattle my teeth when I rev'd it up but you wouldn't really notice it after a day of riding other then the fatigue from holding on. Hoping the foam kills a good bit of vibration.

Offline demographic

  • Hero Member
  • *****
  • Posts: 825
Re: Expandable Foam
« Reply #7 on: October 10, 2006, 08:41:24 AM »
As a side note, I know that some grasstrack car racers use squirty foam in the doors, between the inner and outer wing and various other places to stiffen up the cars as they are not allowed to armour them.

I seem to remember someone rally prepping a car years ago and using some squirty foam to stiffen it up also.

Offline BigGreenMachine

  • Sr. Member
  • ****
  • Posts: 284
Re: Expandable Foam
« Reply #8 on: October 10, 2006, 10:01:19 AM »
Thats pretty cool. I'm gone to fill the Elantra's doors with foam, ttyl. LOL :-o