Anyone painted their plastics a different color w/ success?

[liilpa09]

Just wondering if anyone has painted any of their plastics and had good results. I recently painted the fork guard clamp pieces (the white plastic pieces at the top of the fork guard and also the pieces the brake fluid line goes through for the front) with primer and black paint and it turned out really well. I know the radiator cover panels would probably be a bad idea since my knees are constantly in contact with them, but I was thinking of doing the number plate and rear side panels. Let me know if anyone has any experience with this and how it turned out.

[KXcam22]

Liil,
  I am running PVC pipe fork tube guards that I painted with "Krylon" fusion plastic paint.  It's pretty tough paint but does chip a small amount from rock roost.  I don't know how well painting something like your tank would work since fuel vapors constantly seep through.  I ran into a website where they were restoring and racing vintage canams. They sanded the plastic tanks and painted them with good results (they say). Cam.

[Arigato]

If you add a flex agent to the paint it will last longer than just straight paint.  However, since it's plastic, it will eventually crack and peel.

[Danger4u2]

We do plastic bead blasting where I work and the flex additive works.  I have people all the time asking me to remove paint from plastic auto bumpers.  Plastic bead cracks the paint off and if it has flex additive it has a little "give" to the paint and will not come off well.  We quit working on plastic bumpers, by the time the beads go thru the paint it kind of chews on the plastic and makes it rough.  There are commercial can paints advertised as paint made for plastic, I have not used any so I can't say if they are good or bad.
Danger

[5dracing]

I painted the front number plate and the side panels with krylon fusion. It worked well. After painting the parts sat for a few days. I then put on clear plastic number backgrounds and it has held up well. I have a small amount of peel/rub at the vent area on the side covers, other than that they are in good shape yet. I painted them nearly a year ago to see if I would like black and just have'nt felt the need to change it.

[hughes]

http://www.4strokes.com/tech/plastic_restore/

check this out.

[mikesmith]

I think it was '93 or '94 that Pro-Circuit painted their team bikes plastic, and to keep it looking good it was repainted each race.I think the green looks GOOD!