I have a problem - I bought a 92 kx500 this last winter. I tore it down and rebuilt it. It ran great after putting it back together and started almost the first kick even when cold. Then two weeks ago I took it out to go riding and it was a real pain to start. I had to bump start it to get it going. Once the engine warmed up, it started running fine and started first kick the coupe of times I stalled it on a hill. About an hour and a half into the ride, in a real tight section, the thing just stalled, it didn't lock up, it just stalled. Fuel was on and everything look fine so I kicked it again and it fired up went about 20 feet and it died again. After that it would not refire. I kicked for a while but nothing. I even tried to bump start it several times and still nothing. When I got it back to my truck, I pulled the plug and found I had no spark even with a new plug. When I got home I noticed that the coil looked burned through so I replaced it and was able to see a good spark but the bike still will not start. I have been trolling around the sight and it sounds like I shound change plugs to a BR8EIX and should look into the timing. The problem is tht it has a steahly flywheel weight on and I have no tools to remove it yet. Any help would be greatly appreciated. I want to start racing soon
Brian