Author Topic: Rims and tires question....  (Read 7638 times)

0 Members and 1 Guest are viewing this topic.

QuantumDuck

  • Guest
Rims and tires question....
« on: February 08, 2003, 11:31:50 AM »
What is your rim size and what is the widest tire you have run?
What do think the widest tire is that you could run without problems?

I'm hoping to get at least a 160 on the back and I'm not sure about how wide I can go in the front...any thoughts?

Offline Paul

  • Hero Member
  • *****
  • Posts: 1,205
  • Top Dawg
    • KX Riders
Rims and tires question....
« Reply #1 on: February 08, 2003, 11:43:26 AM »
With a 19" rim I've run a 130/80 and with the 18" I run a 140/80

QuantumDuck

  • Guest
Rims and tires question....
« Reply #2 on: February 08, 2003, 01:00:29 PM »
Whats the width on those rims Admindude?

Offline Paul

  • Hero Member
  • *****
  • Posts: 1,205
  • Top Dawg
    • KX Riders
Rims and tires question....
« Reply #3 on: February 08, 2003, 01:09:29 PM »
Stock, 2.15"
Quote from: QuantumDuck
Whats the width on those rims Admindude?

QuantumDuck

  • Guest
Rims and tires question....
« Reply #4 on: February 08, 2003, 01:17:46 PM »
Thanks Admindude!...

Offline demographic

  • Hero Member
  • *****
  • Posts: 825
Re: Rims and tires question....
« Reply #5 on: February 14, 2003, 09:06:33 PM »
Quote from: QuantumDuck
What is your rim size and what is the widest tire you have run?
What do think the widest tire is that you could run without problems?

I'm hoping to get at least a 160 on the back and I'm not sure about how wide I can go in the front...any thoughts?


If you are putting your on the road as a motard I think you will find this site usefull.
http://www.supermotech.co.uk/
when you get on it Scroll down the bit on the left untill you see TECH, Click on that and read the bit called "Tyre sizes the truth"

I am going to fit a 4.25 rim on mine and I have a few 150 tyres that measure 152 mm at the widest point when fitted to a 4.25 rim.

I think I measured that more than 157 mm and it would push the chain to the side so I think the rim would need offsetting..

Anyway, the people I have spoken to say that 160 tyres cause the bike to turn slower and 150s can cope with the power OK :)

QuantumDuck

  • Guest
Rims and tires question....
« Reply #6 on: February 17, 2003, 11:53:00 AM »
I was at the Idianapolis dealer show this weekend and got to see several motards up close and personal...with the exception of one that had a 155 tire on it...ALL of them were running a 4.25 rim with a 150 tire....and if thats good enough to be on all the 4 strokers I saw with all the mods on them they had...it should be good enough for me..and there is quite a bit of really good street rubber available in a 150 size....my mind is at ease with tire size stuff now :mrgreen: