« previous next »
Pages: [1]   Go Down

Author Topic: Top end pipe for Kx500  (Read 7088 times)

0 Members and 1 Guest are viewing this topic.

SandToyz

  • Guest
Top end pipe for Kx500
« on: December 28, 2005, 11:03:01 PM »
What is the best top end pipe for the Kx500

My bike is a 540cc
Logged

FIVE-HUNGE

  • Guest
RE: Top end pipe for Kx500
« Reply #1 on: December 29, 2005, 01:18:43 AM »
FMF GNARLY DESERT PIPE AND BOYSEN PRO SERIES REEDS ARE A GOOD COMBO FOR MIDRANGE AND TOP END PULL ON A STOCK MOTOR.
Logged

Offline Timbowe

  • Hero Member
  • *****
  • Posts: 671
RE: Top end pipe for Kx500
« Reply #2 on: December 29, 2005, 11:55:23 AM »
Pro circut.
Logged
KX500
Weapon in the hands of the Master

SandToyz

  • Guest
RE: Top end pipe for Kx500
« Reply #3 on: December 30, 2005, 05:02:19 PM »
work or platinum ?
Logged

Offline Arigato

  • Hero Member
  • *****
  • Posts: 516
RE: Top end pipe for Kx500
« Reply #4 on: December 30, 2005, 05:33:00 PM »
FMF Desert with a Boyesen rad valve.  Of course, milling the head, porting the cylinder and boring the carb makes it a bit better!
Logged

Offline doordie

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 775
  • Do or Die.....
RE: Top end pipe for Kx500
« Reply #5 on: December 31, 2005, 12:54:46 AM »
Works pipes always more power, thinner but fragile. :evil:
A stock pipe, shortened, will give you same/more topend than FMF/PC and you save money. :wink:

//doordie
Logged
Iceroad champion 2006,still 2007,even 2008 without a single race!

Offline hughes

  • Hero Member
  • *****
  • Posts: 1,923
    • Dirt Hammers
Top end pipe for Kx500
« Reply #6 on: December 31, 2005, 03:31:25 AM »
For a short pipe try a Pro Circuit 87 kx500 pipe. My 87 Pro Circuit pipe is shorter than the 88- newer kx500 pipes. 88-and newer pipes curve around by the ignition cover but mine does not.
Logged
Open Class 2-Stroke Kawasaki KX500
Yamaha 2005 YZ250
Richard Hughes
Dirt Hammers - Online Off-Road Journal
hughes@dirthammers.com
http://www.dirthammers.com

Offline gowen

  • Resident Newbie
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1,350
  • www.KXRiders.com
Re: RE: Top end pipe for Kx500
« Reply #7 on: December 31, 2005, 05:46:50 PM »
Quote from: Arigato
FMF Desert with a Boyesen rad valve.  Of course, milling the head, porting the cylinder and boring the carb makes it a bit better!


Man knows his stuff. FMF Desert and Rad Valve. You can not go wrong with this combo due to the impressive top-end. Have you tried the PVL yet? You have that big-ass pipe on your KX don;t you? Are you thinking of selling it?
Logged

Offline doordie

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 775
  • Do or Die.....
RE: Re: RE: Top end pipe for Kx500
« Reply #8 on: December 31, 2005, 11:01:23 PM »
Hughes,

It?s because K5 of 87 have a different barell with another exhaust- portduration. :wink:
But it fits nice!  8)

//doordie
Logged
Iceroad champion 2006,still 2007,even 2008 without a single race!

SandToyz

  • Guest
Re: RE: Top end pipe for Kx500
« Reply #9 on: January 04, 2006, 02:55:23 AM »
Yes i have CPI pipe right now on my bike and i want to make some new setup to compare and see what will work best for me.
I ordered a custome shearer pipe like thats one for my honda and i lost the top end on my bike it will die when i sheft it to 5th gear on hill racing..trying diffrent gearing but the gain= low speed than b4 so i switched back to FMF on the honda.

On my Kx500 i never shift to the 5th gear on the hill racing even with 13 in front so i always leave it in 4th gear(but don't worry i beat all the honda guys on the race) so i'm thinking now to try Pro Circut or FMF and see if it will help me at the top end like what happened to the CR500
Logged

Offline gowen

  • Resident Newbie
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1,350
  • www.KXRiders.com
RE: Re: RE: Top end pipe for Kx500
« Reply #10 on: January 04, 2006, 04:40:41 AM »
You will be very happy with your top-end on a desert pipe & costs the same as the rest.
Logged
Pages: [1]   Go Up
« previous next »