« previous next »
Pages: [1]   Go Down

Author Topic: KX500 triple clamps  (Read 1423 times)

0 Members and 1 Guest are viewing this topic.

Offline 808fullthrottle

  • Newbie
  • *
  • Posts: 2
KX500 triple clamps
« on: July 04, 2020, 05:11:17 AM »
Aloha guys...newbie here to the forum. I pulled my ‘96 KX500 out of the storage room after purchasing it about 4 years ago. It had some issues when I bought it the worst being the front end was shot. I found a set of solid forks on eBay but when I got them found out the tubes were too large for my stock clamps. The ‘96 tubes are 43mm and the ones I bought (I’m assuming off a ‘97 and newer)  are 46mm. So my question is where can I find a set of triple clamps to fit these tubes? No luck on eBay or cl.
Logged

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: KX500 triple clamps
« Reply #1 on: July 04, 2020, 09:17:29 AM »
97-04 kx500 triples are the same but you have to be real quick to buy them because they are being used to run the 450f forks on the kx500.
New?
You might try Emig Racing.
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline 808fullthrottle

  • Newbie
  • *
  • Posts: 2
Re: KX500 triple clamps
« Reply #2 on: July 05, 2020, 06:30:55 PM »
Yes they are a hot item to find! Thanks for your response...I’ll check out Emig racing🤙🏻
Logged
Pages: [1]   Go Up
« previous next »