I recently purchased a 08 Kx250f with no spark. Lost on what todo next. I replaced the stick coil and stator. Bought a used cdi off eBay that was “running” guy stands behind it. Checked the flywheel still has the magnetism. Checking coil wires when no coil is hooked up and kicking over volts are all over the map 30-130-200 ect when coil is plugged in the volts drop down almost instant then I kick it over the volts go up to 200 or so when I check the wires. Checked the ground also it’s good and the spark plug.
I checked ohm on
Stator
Bl/r white/ red. 32.7
White yellow 2.6
CPS. 95
