Author Topic: Ignition timing... (Read 17164 times)

Norway · « **on:** July 29, 2005, 03:09:07 AM »

Any hot tips and trix about ignition timing on the K5?
Is it all about making the adjustment, test it and then pull off the flywheel again and try a new setting?
Any help would do...
How much opening should i have on the sparkplug?

gowen · « **Reply #1 on:** July 29, 2005, 05:59:21 AM »

What type of flywheel are you using? You should be able to adjust the ignition timing while the flywheel is installed, which is held by a key so it is not adjustable. Aftermarket flywheels do not use keys.

hughes · « **Reply #2 on:** July 29, 2005, 07:14:35 AM »

Your stator plate will have three marks or lines engraved and then a line engraved or casted on the engine case. These should be able to see to the left of the flywheel. The line in the middle on the stator plate is standard timing. There will be two screw that hold the stator plate from rotating just loosen and advance or retard your timing. Moving the stator plate clockwise advances timing and moving ounterclockwise retards timing. Top line retard timing middle line standard timing bottom line advance timing. Plug gap is .020-.024 or .5-.6mm. Yes you will need to adjust timing and go test ride.

Norway · « **Reply #3 on:** July 29, 2005, 10:01:09 AM »

Excelent! Testing tomorrow...

hughes · « **Reply #4 on:** July 29, 2005, 01:02:27 PM »

Let's us know how your results turn out. I have not adjusted my timing. It's set on standard.

Norway · « **Reply #5 on:** July 30, 2005, 04:09:43 AM »

My machine worked excelent today on the SM-track! Sett the timing on standard, but didnt get the time to adjust and test... Will do soon!
Is there any kind of aftermarket ignition system for the K5? Something like a tuned system?

doordie · « **Reply #6 on:** August 05, 2005, 05:55:23 AM »

More advance get short abrupt power.(supercross)
Less advance get more overrev.(dunes)

//doordie

hughes · « **Reply #7 on:** August 05, 2005, 12:35:45 PM »

I like short abrupt power. I think I will try advancing mine. Thanks doordie.

kawdude · « **Reply #8 on:** October 30, 2005, 01:39:41 PM »

How about easier starting?

Author Topic: Ignition timing... (Read 17164 times)

kawdude