« previous next »
Pages: [1]   Go Down

Author Topic: Grease on main seals  (Read 2319 times)

0 Members and 1 Guest are viewing this topic.

Offline Bcsnowbiker

  • Jr. Member
  • **
  • Posts: 34
Grease on main seals
« on: July 11, 2019, 05:04:15 AM »
Well I have all my parts now and the time so the cases are going back together.
I see the clymer manual says to fill the seals on the main bearings with grease. The OEM manual also vaguely says to fill all seals with grease.
Never done this before in all my rebuilds and my feeling is the fuel would eventually wash out the grease with a potential to plug the oiling holes.
Does anyone fill their main seals with grease?
Logged

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: Grease on main seals
« Reply #1 on: July 11, 2019, 11:04:06 AM »
Yes, I use a assembly lube or white lithium..
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline Bcsnowbiker

  • Jr. Member
  • **
  • Posts: 34
Re: Grease on main seals
« Reply #2 on: July 11, 2019, 11:42:20 AM »
Quote from: sandblaster on July 11, 2019, 11:04:06 AM
Yes, I use a assembly lube or white lithium..

To fill the seal lip or just for assembly?
Thanks 👍
Logged

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: Grease on main seals
« Reply #3 on: July 11, 2019, 01:00:33 PM »
Your question, "The OEM manual also vaguely says to fill all seals with grease."
That is what I was responding to.
The idea is to make sure that none of the seal contact area is dry.
You do not need to grease the entire seal, just where a rotating assembly contacts it.
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline Bcsnowbiker

  • Jr. Member
  • **
  • Posts: 34
Re: Grease on main seals
« Reply #4 on: July 11, 2019, 02:09:18 PM »
Ok cool standard issue.
I was reading into it that they wanted me to fill the seal lip with grease like a wheel bearing.
Logged
Pages: [1]   Go Up
« previous next »