Author Topic: 92 KX500 Land Speed Record Attempt Production Class  (Read 13428 times)

0 Members and 3 Guests are viewing this topic.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: KX Guru Racing KX500 Special bike It's like the mystery machine but better
« Reply #15 on: February 28, 2020, 02:12:21 PM »
Some have complained about after market rebuild kits not fitting correctly. I used a Pro X kit and a Tusk piston. I clean the seal grooves out so they look like they are new. One small bit of debris will cause the piston to bind. Before installation I clean the seals as they are generally dirty straight out of the package. Also, I use some brake fluid to lubricate the seals. The piston should go in with finger pressure only.



The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Starting on the front brakes with some new caliper pistons.

The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline motorman455

  • Full Member
  • ***
  • Posts: 118
You should cerakote those calipers while they apart!

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Not for this build.
Why?
It's a mystery  :-o

All will become clear soon enough..  8-)
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Strapped down and waiting for the build to start..
For now it's keeping The Relic company  8-)



The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
KX Guru Racing 92 KX500 Fast bike build
« Reply #20 on: March 28, 2020, 03:37:18 PM »
All the bearings, seals, and bushings have been replaced and it's ready for assembly  8-)

The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: KX Guru Racing 92 KX500 Fast Bike Build
« Reply #21 on: April 02, 2020, 04:25:56 PM »
Just waiting for a few more parts...

The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: KX Guru Racing 92 KX500 Fast Bike Build
« Reply #22 on: April 04, 2020, 04:25:41 AM »
Things are progressing nicely..

The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: KX Guru Racing 92 KX500 Fast Bike Build
« Reply #23 on: April 05, 2020, 01:54:08 PM »
Super Moto Sunday Surprise! 92 KX500 Fast Bike Build.
 :mrgreen:

The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: KX Guru Racing 92 KX500 Fast Bike Build
« Reply #24 on: May 22, 2020, 10:57:55 AM »
Black Betty mock up...

The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline motorman455

  • Full Member
  • ***
  • Posts: 118
Re: KX Guru Racing 92 KX500 Fast Bike Build
« Reply #25 on: May 26, 2020, 08:07:04 AM »
It'll be interesting to hear how it handles.  Who's cone pipe is that?

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: KX Guru Racing 92 KX500 Fast Bike Build
« Reply #26 on: May 26, 2020, 01:23:57 PM »
As shown it likely won't turn well...
However, it should do great in a straight line  :-D
By lowering the front end a bit more and potentially raising the rear a bit should get handling right back where it needs to be.

The pipe was purchased from Jonathon Bell in the UK.
the quality is excellent.
Jonathon is a super nice guy.
https://www.facebook.com/jonathon.bell.566

Hit him up for cost if you are interested.
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: KX Guru Racing 92 KX500 Fast Bike Build
« Reply #27 on: May 26, 2020, 03:36:01 PM »
Yes... hand lapping cases is always pain...


The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: KX Guru Racing 92 KX500 Fast Bike Build
« Reply #28 on: May 31, 2020, 06:33:17 AM »
I could not find a 7/8 top bar clamp to fit a Scott's Damper on.
Sooooo... I modded one to work  8-)





The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: KX Guru Racing 92 KX500 Fast Bike Build
« Reply #29 on: April 15, 2021, 05:23:01 AM »
Good for a HP or two over my worn out O-Ring chain

The four stroke engine: That's one stroke for producing power and three for wearing the engine out.