Maintenance & Technical > KX500 Original
All about reed spacers -
flyingfitz:
5MM or 10MM? Someone on ebay selling 5 and 10 mm spacers for the 500. I am considering a spacer to be used with V Force 2 reed block I just purchased. Will I notice a difference? Which one? Is the V Force 2 enough as a stand alone unit? Let me hear your opinions! Fitz
jfabmotorsports.com:
I run the Vforce 2 without a spacer and the bike performs very well. I have sold them to plenty of guys running the V force 2 reeds. Maybe some of them will chime in and give a report for you.
JFAB
matzilla:
On my 88 I used the 10mm spacer with the V-Force 2, but the top of the carb hit on the frame so I took it out. The V-Force 2 seems to do a great job by itself with no spacer.
98kaw500rider:
Nitro ? Whoa ! It's boogey time !
BasketCase:
First trip out with my new 3/8" spacer + VForce3 reeds = new rear fender. Not sure if it's the math or the idiot running the throttle but whatever, I've got a shiny new fender.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version