Author Topic: KX500 HEAVY CLUTCH PULL, WHAT CAN BE DONE  (Read 4301 times)

0 Members and 1 Guest are viewing this topic.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
KX500 HEAVY CLUTCH PULL, WHAT CAN BE DONE
« on: October 10, 2018, 02:15:15 PM »
By now I'd say most of you guys know what is being done to lesson clutch pull.
1. Straighten the cable a bit where the metal shield is at. And make sure the cable is new.
2. Cool aftermarket clutch perches.
3. Extended clutch puller arms.
4. Hydraulic clutch.
5. Basket and hub in good condition.
The other day Jason Tanner finally confided in me some ideas he has.... I think each one has merit but we need to be able to test each one out. Out of respect for Jason's idea's I can post pics of what he came up with. But I will be posting results from each experiment to see what can be done.

Any idea's you may have would be welcome. We are looking for simple effective idea's that can be done by most guys with limited tools. (Like me).

The first thing we did was put together a mock up testing stand.. Nothing better the genuine Kawi parts :-)

Once we get this together we will be doing some really cool testing so stay tuned..


The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: KX500 HEAVY CLUTCH PULL, WHAT CAN BE DONE
« Reply #1 on: October 10, 2018, 02:30:46 PM »
Travis Saturley:  I move the clutch (and brake) perch in towards the middle of the bars. This causes me to only use the end of the lever, increasing my leverage. I have long fingers, so that may not work for everyone.
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline dave916

  • Hero Member
  • *****
  • Posts: 546
Re: KX500 HEAVY CLUTCH PULL, WHAT CAN BE DONE
« Reply #2 on: October 10, 2018, 09:49:30 PM »
Genuine cable or one with swivel ends  {well lubed not ky :-D}
Good needle rollers in cases

I Can pull my clutch with on finger all day long

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: KX500 HEAVY CLUTCH PULL, WHAT CAN BE DONE
« Reply #3 on: October 11, 2018, 02:51:06 AM »
Genuine cable or one with swivel ends  {well lubed not ky :-D}
Good needle rollers in cases

I Can pull my clutch with on finger all day long

I agree...I'm runnin a completely stock clutch.
Keep the cable up to par and well lubed...pulls almost as easy as my 250.
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: KX500 HEAVY CLUTCH PULL, WHAT CAN BE DONE
« Reply #4 on: October 11, 2018, 10:33:39 AM »
To test all our idea's I need a very accurate test fixture..
So, I grabbed my best spare engine cases and set about gettin it done  :-o



Hello MR. Sawsall





The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: KX500 HEAVY CLUTCH PULL, WHAT CAN BE DONE
« Reply #5 on: October 11, 2018, 10:35:29 AM »






Well... let's get rid of that pesky casing that covers the bottom bearing.
This will help later on during testing...   :-D

The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: KX500 HEAVY CLUTCH PULL, WHAT CAN BE DONE
« Reply #6 on: October 11, 2018, 10:35:58 AM »
Something like this....



The four stroke engine: That's one stroke for producing power and three for wearing the engine out.