UPDATED 4-16-18
Back in stock.... KX500 2 piece clutch cover adapters.
For those that don't know, this will allow you to use a KX450F clutch cover on your KX500.
YES! You will need to machine off your clutch basket area of your KX500 and weld this new adapter on. You will also need to drill and tap the holes for the fasteners. But, we did provide some pilot holes which makes drill and tapping far easier.
They are 70 USD delivered anywhere in the USA.
For the UK contact Jonathon Bell
In Canada contact Adam MillAr
If you need more then one, let me know how many and where I'm shipping and I will get you a quote.
If you want one, message me with your PayPal email address and I will send you an invoice that you can pay for directly from your PayPal account.
Thanks!
Mike
I was asked by a few members that once I found out how many covers I had left over that I post the info.
I have 3 covers.
They are priced according to quality.
Remember, these are used.
All of them are fully functional but there are nicks, scratches, ect.
Here is a link to them on my eBay store:
http://www.ebay.com/sch/i.html?_from=R40&_sacat=0&_nkw=kx500+2+piece+clutch+cover&_sop=16If you want one, DO NOT BUY OFF OF EBAY!!!
If you buy direct you save 50.00 over the eBay prices.
Yes, you can still pay with PayPal
In addition to this adapter, you will need (7) M6 x 1.0 x 20mm bolts,
A 06-15 KX450F outer clutch cover gasket,
A 06-15 KX450F outer clutch cover plug,
A 06-15 KX450F outer clutch cover and,
A 89-04 KX500 Clutch cover gasket.
Keep in mind, this cover has been ran for years on a bike.
It is not new.
Yes, it has been cleaned up but it is not perfect.
There are nicks, scratches, ect that you should expect.
Look at the pics carefully and zoom in on them.
What you see is what you will get.
Any questions? Feel free to ask.