« previous next »
Pages: [1]   Go Down

Author Topic: DOT brake lines  (Read 3472 times)

0 Members and 1 Guest are viewing this topic.

Offline 1980mcneil

  • Full Member
  • ***
  • Posts: 92
DOT brake lines
« on: March 25, 2017, 02:56:44 PM »
Trying to plate my kx5. Need the cheapest DOT lines I can find.  The local shop that is going to "OK" the bike said the lines are sometimes stamped with a DOT on them. 
Any help would be great.
thanks
Logged
2004 kx500
Accu-products decompression Valve
Powerdynamo heavy flywheel ignition
Pro-Circuit Platinum II / FMF PowerCore 2
Moose racing Reed spacer
Baja design duel sport kit
Plated.
Rekluse

Offline alward25

  • Hero Member
  • *****
  • Posts: 1,349
Re: DOT brake lines
« Reply #1 on: March 26, 2017, 12:19:10 AM »
I did not know that was a requirement for Washington.
Logged
"Let there be light"

Offline alward25

  • Hero Member
  • *****
  • Posts: 1,349
Re: DOT brake lines
« Reply #2 on: March 26, 2017, 12:22:29 AM »
the stock hoses should be anyway
Logged
"Let there be light"

Offline 1980mcneil

  • Full Member
  • ***
  • Posts: 92
Re: DOT brake lines
« Reply #3 on: March 26, 2017, 03:09:41 AM »
Thanks.  I would think they would be fine.  I saw nothing on this page about it

http://www.dol.wa.gov/vehicleregistration/offroadmotorcycles.html

They were trying to get me to let them put a street kit on the bike for me. For a (ridiculous) small fee.  They said they will throw in the brake lines for me.  I'll probably go somewhere else for the inspection ;)
Logged
2004 kx500
Accu-products decompression Valve
Powerdynamo heavy flywheel ignition
Pro-Circuit Platinum II / FMF PowerCore 2
Moose racing Reed spacer
Baja design duel sport kit
Plated.
Rekluse

Offline 1980mcneil

  • Full Member
  • ***
  • Posts: 92
Re: DOT brake lines
« Reply #4 on: April 25, 2017, 01:27:06 PM »
Bringing this back up hoping for some help...
I don't have my bike at home with me (2004kx500)
Can anyone tell me if the stock brake lines have a DOT mark on them?  I looked real quick the other day and didn't see them but most the line is covered by plastic that I didn't tear back...
If I do need to buy some DOT ones has anyone has purchased some? what are the lengths for the front or back or which ones did you buy?

Thanks
Logged
2004 kx500
Accu-products decompression Valve
Powerdynamo heavy flywheel ignition
Pro-Circuit Platinum II / FMF PowerCore 2
Moose racing Reed spacer
Baja design duel sport kit
Plated.
Rekluse

Offline 1980mcneil

  • Full Member
  • ***
  • Posts: 92
Re: DOT brake lines
« Reply #5 on: April 29, 2017, 03:01:55 PM »
In case anybody is interested. I believe I had stocked kx500 brake lines on my 2004. They were not DOT rated.  Galfer makes brake lines that are all Federal Highway standard comply able and I was able to pick up a CR Style front brake and rear brake line for $110 hundred and twenty shipped from galfer online. Didn't do a ton of searching but this was the cheapest I could find and seems like a pretty good upgrade. I'll update for there when I install the brake lines
Logged
2004 kx500
Accu-products decompression Valve
Powerdynamo heavy flywheel ignition
Pro-Circuit Platinum II / FMF PowerCore 2
Moose racing Reed spacer
Baja design duel sport kit
Plated.
Rekluse
Pages: [1]   Go Up
« previous next »