Author Topic: 2016 Pumpkin seed build...  (Read 149347 times)

0 Members and 3 Guests are viewing this topic.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 2016 Pumpkin seed build...
« Reply #285 on: July 17, 2019, 05:53:01 PM »
Muffler assembly..
Got the outlet cap on...



« Last Edit: July 17, 2019, 05:58:31 PM by sandblaster »
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 2016 Pumpkin seed build...
« Reply #286 on: July 18, 2019, 05:41:51 AM »
When it comes to coloring Ti you can use all sorts of things to do it.
I chose to use very even heat to get the color I was after.
Just don't tell your wife that you are using the BBQ for things other than meat  :-D
Heat coloring of titanium:
pale gold straw-385 C or 725F
purple-412 C or 774F
deep blue-440 C or 824F
red purple-565 C or 1049F
brown gray-648 C or 1199F
green blue-925 C or 1697F

The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline motorman455

  • Full Member
  • ***
  • Posts: 118
Re: 2016 Pumpkin seed build...
« Reply #287 on: July 19, 2019, 04:17:57 AM »
Interesting looking inlet pipe!

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 2016 Pumpkin seed build...
« Reply #288 on: July 19, 2019, 04:56:50 AM »
Oh yeah...
That's what it takes to fit  :-D

Side notes:
As soon as the Ti reaches temp, it colors.
You don't have to keep it at that temp.
In fact, keeping it at temp will not change the color at all...
Only going up in temp will change the color.
Re-cored to a larger diameter, colored, modded to fit, and assembled.
Ready to mount.

The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 2016 Pumpkin seed build...
« Reply #289 on: July 20, 2019, 06:09:18 PM »
A little back ground on this project. Because it's made from Titanium it's very hard to find someone to weld it. Turns out Rob lives a few miles down the road and was friends with Alex Ward as kids growing up. Also, Ti is very hard to polish, drill, cut, whatever. I suppose if you have the right tools and know what you are doing would greatly help. I know nothing 😲 Anyhow, I showed Rob what I wanted done after I pulled the stock set up apart. I even ground all the internal welds as I had to put a new, larger diameter core in it. That meant that all the capture parts for the core had to be removed and redone. Because the Ti is so hard and so thin we could not bend the tubing with anything that we had so Rob cut little pie pieces of tube and welded and fit them one at a time. Needless to say it was a lot of work. If I was doing another I would use Stainless steel. But in the end, I am very pleased with the results and it sounds great. Yes, It's a little short for a KX500 silencer but with this engine I don't think that will be a issue. But we will know a lot more later this coming week. Jetting, testing, and tuning...

The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 2016 Pumpkin seed build...
« Reply #290 on: July 21, 2019, 07:36:16 AM »
Yes, the shop is dirty... So what  :evil:

The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 2016 Pumpkin seed build...
« Reply #291 on: July 21, 2019, 08:34:15 AM »
The bike is cold and jetted very rich but you get the idea...
Does your KX500 sound like this?

https://youtu.be/kkRBUPYFgVY
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 2016 Pumpkin seed build...
« Reply #292 on: July 24, 2019, 07:43:00 AM »
Took it for my first test ride last night.
I'm very impressed with this bike.
A little fine tuning left and this thing will be incredible...

The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: 2016 Pumpkin seed build...
« Reply #293 on: July 24, 2019, 08:52:06 AM »
Can we expect/hope some GoPro footage?
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 2016 Pumpkin seed build...
« Reply #294 on: July 24, 2019, 01:22:43 PM »
Can we expect/hope some GoPro footage?

At some point yes.
But it likely won't be until after the magazine article comes out.
I don't want to steal their thunder  :lol:
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline kxpegger

  • Hero Member
  • *****
  • Posts: 855
Re: 2016 Pumpkin seed build...
« Reply #295 on: July 24, 2019, 01:33:34 PM »
I like what I saw here today! Great job Sandblaster!
North Las Vegas

"05" RMZ450, "08" KX500AF "11" KTM 450SX-F "12" KTM 250SX "15" KTM450SX-F

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 2016 Pumpkin seed build...
« Reply #296 on: July 24, 2019, 03:28:18 PM »
I like what I saw here today! Great job Sandblaster!

Thanks Pegger...
This build has been a real journey...
But I'm anxious to get this all over so I can start on the mystery machine again  :lol:
Not to mention a sweet little Bultaco 125 Pursang that belongs to my Dad.
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline ftc

  • Full Member
  • ***
  • Posts: 64
Re: 2016 Pumpkin seed build...
« Reply #297 on: July 25, 2019, 06:04:37 AM »
lookin great man, incredible build!

Offline WRXBRUMBY

  • Full Member
  • ***
  • Posts: 78
Re: 2016 Pumpkin seed build...
« Reply #298 on: August 04, 2019, 12:33:18 AM »
Good to see you are still at it sandblaster
2008 FE650 (KX500 but with manners and E-Start)
2003 KX500 Scares me! (Reminded me I couldn’t ride well)
1997 TE610 Arm chair! (Made me think I could ride)
2000 CT110 Fun!
1986 KDX200 SOLD! (But looking for another)
1970 AG100 Still makes me 😀

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 2016 Pumpkin seed build...
« Reply #299 on: August 04, 2019, 02:30:46 AM »
Thanks..
Working on getting the jetting sorted out.
Hopefully the first part of that will be done on Tuesday.
Then I need to dyno it and double check the setup with the Air/Fuel probe.
One I have it as good as I can I'm taking the bike to 2500 feet and re-jetting.
Then again to 4500 ft.
I don't know where MXA is doing the testing yet but I need to be prepared, and this builds jetting requirements are a bit different than what I have done in the past.
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.