Author Topic: 1992 KX500 Snow bike engine for Brent  (Read 9135 times)

0 Members and 1 Guest are viewing this topic.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
1992 KX500 Snow bike engine for Brent
« on: December 10, 2016, 08:25:56 AM »
This will be a cool engine build.
The engine came to us with a Eric Gore ported cylinder.
The porting would have been ok for a trail bike but NOT for a Snow bike..
You can read the details so far here:

http://www.oem-cycle.com/forum/viewtopic.php?f=41&t=1210

The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: 1992 KX500 Snow bike engine for Brent
« Reply #1 on: December 10, 2016, 10:46:36 AM »
Interesting.
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 1992 KX500 Snow bike engine for Brent
« Reply #2 on: December 10, 2016, 11:13:30 AM »
When we are done it will breathe a bit better then the E.Gore cylinder..
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 1992 KX500 Snow bike engine for Brent
« Reply #3 on: December 19, 2016, 12:48:46 PM »
Eric's to the left...
Mine to the right  8-)

The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline dave916

  • Hero Member
  • *****
  • Posts: 546
Re: 1992 KX500 Snow bike engine for Brent
« Reply #4 on: December 19, 2016, 11:44:18 PM »
Eric's to the left...
Mine to the right  8-)


When we are done it will breathe a bit better then the E.Gore cylinder..

Bit of a bold statement :-)
Looks like eric is aiming more air flow toward piston/ crankcase area

U seem to be aiming  more towards boyesen port by removing alot of metal on the cylinder side of the boyesen port  which i am not a fan of because kawasaki are prone too cracking around rear cylinder studs

Which is better? dont know without dyno



Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 1992 KX500 Snow bike engine for Brent
« Reply #5 on: December 20, 2016, 04:17:12 AM »
What I'm doing works pretty well for what I want..
I won't go to the extreme I did on this drag bike but the same principals apply on a smaller scale..

http://www.oem-cycle.com/forum/viewtopic.php?f=41&t=1120

Oh, and Jeff has won 6 Championships on his KX500, including this season with the new top end and crank I built him.
He won this last dirt season with no NOS, all engine.
Ice season starts up soon (Hopefully) and he will turn on the spray  8-)
Jeff said that the new top end I built puts out more power without NOS then his engine did before with NOS.
And the really cool thing is we can give him more power at any time  :-o
« Last Edit: December 20, 2016, 04:26:00 AM by sandblaster »
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 1992 KX500 Snow bike engine for Brent
« Reply #6 on: January 07, 2017, 11:05:12 AM »
Send your crank parts out for assembly and balancing while dirty... and they will come back dirty with a new rod kit.
Send them out clean or polished and the results speak for themselves.

The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 1992 KX500 Snow bike engine for Brent
« Reply #7 on: January 18, 2017, 12:51:26 PM »
Got it put together enough tonight so that I can figure out the port timing and the head squish.
So now I can finish porting the cylinder and get it sent out for repair and plating.
Also, Larry will be getting another head to do very soon :-)
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.