Author Topic: Lower fork tube ?  (Read 4647 times)

0 Members and 1 Guest are viewing this topic.

Offline reklessj

  • Hero Member
  • *****
  • Posts: 921
Lower fork tube ?
« on: May 15, 2016, 02:56:56 PM »
So while I was cleaning my bike today I noticed that when I got lodged in the rocks at the D38 GP, I scratched up my lower fork tube. Doesn't feel real rough and don't see any leaking from seals yet but coating is down to dull metal. What should I do? Run it till I have an issue, that's the way I normally roll? Who does a good job of recoating?
My rides: 1994 KX500, 1988 T4, 1998, ZXI 1100 JETSKI, 2003 MOUNTAIN CAT 900
WIFES (Baby Fiver) rides: 2004 KTM 105SX,1992 LT250R, 1995 ZXI 900 JETSKI,  2011 RMK 600
SONS ride: 1995 YZ125,2002 RM 250
other rides: 2007 RMZ450 RC Ediition, 2003 RMK700

Offline reklessj

  • Hero Member
  • *****
  • Posts: 921
Re: Lower fork tube ?
« Reply #1 on: May 15, 2016, 03:11:56 PM »
Right on, I knew I liked your style!!
My rides: 1994 KX500, 1988 T4, 1998, ZXI 1100 JETSKI, 2003 MOUNTAIN CAT 900
WIFES (Baby Fiver) rides: 2004 KTM 105SX,1992 LT250R, 1995 ZXI 900 JETSKI,  2011 RMK 600
SONS ride: 1995 YZ125,2002 RM 250
other rides: 2007 RMZ450 RC Ediition, 2003 RMK700

Offline bandit88

  • Jr. Member
  • **
  • Posts: 36
Re: Lower fork tube ?
« Reply #2 on: May 17, 2016, 05:24:07 AM »
Fill in with clear nail polish and then polish smooth.

Offline reklessj

  • Hero Member
  • *****
  • Posts: 921
Re: Lower fork tube ?
« Reply #3 on: May 17, 2016, 06:04:31 AM »
Fill in with clear nail polish and then polish smooth.
What would I smooth it with?
My rides: 1994 KX500, 1988 T4, 1998, ZXI 1100 JETSKI, 2003 MOUNTAIN CAT 900
WIFES (Baby Fiver) rides: 2004 KTM 105SX,1992 LT250R, 1995 ZXI 900 JETSKI,  2011 RMK 600
SONS ride: 1995 YZ125,2002 RM 250
other rides: 2007 RMZ450 RC Ediition, 2003 RMK700

Offline bandit88

  • Jr. Member
  • **
  • Posts: 36
Re: Lower fork tube ?
« Reply #4 on: May 17, 2016, 10:00:23 AM »
I would oil some high grit sandpaper, something like 1500-2000.  Done that in the past on some old 70s enduros and it worked out well.  Just take it slow and check your work periodically with your fingernail. 

Offline reklessj

  • Hero Member
  • *****
  • Posts: 921
Re: Lower fork tube ?
« Reply #5 on: May 17, 2016, 10:57:57 AM »
I would oil some high grit sandpaper, something like 1500-2000.  Done that in the past on some old 70s enduros and it worked out well.  Just take it slow and check your work periodically with your fingernail. 
cool thanks bandit
My rides: 1994 KX500, 1988 T4, 1998, ZXI 1100 JETSKI, 2003 MOUNTAIN CAT 900
WIFES (Baby Fiver) rides: 2004 KTM 105SX,1992 LT250R, 1995 ZXI 900 JETSKI,  2011 RMK 600
SONS ride: 1995 YZ125,2002 RM 250
other rides: 2007 RMZ450 RC Ediition, 2003 RMK700

Offline reklessj

  • Hero Member
  • *****
  • Posts: 921
Re: Lower fork tube ?
« Reply #6 on: May 17, 2016, 04:02:17 PM »
Just pee on it and go for a ride
My piss will eat right through em!! I will have Mike piss on it  :lol:
My rides: 1994 KX500, 1988 T4, 1998, ZXI 1100 JETSKI, 2003 MOUNTAIN CAT 900
WIFES (Baby Fiver) rides: 2004 KTM 105SX,1992 LT250R, 1995 ZXI 900 JETSKI,  2011 RMK 600
SONS ride: 1995 YZ125,2002 RM 250
other rides: 2007 RMZ450 RC Ediition, 2003 RMK700