Author Topic: Clutch Cover Mod  (Read 27618 times)

0 Members and 1 Guest are viewing this topic.

Offline Johnniespeed

  • Hero Member
  • *****
  • Posts: 575
  • The Thrill of Speed overcomes the fear of Death.
Re: Clutch Cover Mod
« Reply #15 on: November 14, 2006, 11:30:21 AM »
There's a stator protector loop too ! And notice the billet clutch arm. And I notice he puts the clutch cable "outside" the frame, like I learned to do from this forum.
Spring is here and the Mighty 500 wants to ride.
 2004 KX500 E16
 Michigan has the best groomed and mapped trail system, check out the Cycle Conservation Club of Michigan trail maps.

Offline hughes

  • Hero Member
  • *****
  • Posts: 1,923
    • Dirt Hammers
Re: Clutch Cover Mod
« Reply #16 on: November 15, 2006, 03:01:58 AM »
I'm pretty sure thats a custom peice, I'm going to look into it, I've got a couple ideas.


Hows he keep everything so clean too!!!!!!??


Pro riders have techs that completely disassembly their bikes after each race to clean, lube, replace anything that it needs. Just think Destry rides in the desert at a high rate of hurry and I'm sure his bikes need major cleaning and lubing or repair after each event.
Open Class 2-Stroke Kawasaki KX500
Yamaha 2005 YZ250
Richard Hughes
Dirt Hammers - Online Off-Road Journal
hughes@dirthammers.com
http://www.dirthammers.com

Offline FuriouSly

  • Sr. Member
  • ****
  • Posts: 388
    • the "Base Camp"
Re: Clutch Cover Mod
« Reply #17 on: November 15, 2006, 03:56:38 AM »
That is a great picture showing the front exhaust pipe mount.  If you look at the anti-vibe rubber bracket you can see how bad the FMF pipe brackets are mis-aligned causing excessive tearing forces on the rubber.  Just take a large crescent wrench and twist the pipe bracket more parallel with the frame tab and you will increase the lifespan of the anti-vibe bracket considerably.

Sly

Offline Polar-Bus

  • Hero Member
  • *****
  • Posts: 1,023
Re: Clutch Cover Mod
« Reply #18 on: November 15, 2006, 04:06:36 AM »
That removable clutch cover is SWEET!   I like that and the protector bar in front of the water pump.  If anyone finds a place to buy that clutch cover pass on the information.

Contact Kawasaki's racing division and have your AMA Pro factory rider resume ready. That clutch cover is an "unobtanium" magnesuim works piece. Notice the added threaded bosses to accept the screws? There is no way to mod a production KX500 cover to work like that works unit. Ahh the trickery of the works bikes. I went to a Parts Unlimited AMA pro track day at Southwick, and I even got a chance to ride Pastrana's factory 125  practice bike. All's I can say is oh my god....... The shear screaming power, and the suspension felt like you were floating on a cloud.....
01' KX500
'84 GPz1100
'87 GSX-R  750
'06 HD Fatboy
'73 Kawi H1
'03 CRG KX500 Shifter kart

Offline doordie

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 775
  • Do or Die.....
Re: Clutch Cover Mod
« Reply #19 on: November 19, 2006, 05:21:48 AM »
You can go my way if you want! :evil:
Iceroad champion 2006,still 2007,even 2008 without a single race!

Offline doordie

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 775
  • Do or Die.....
Re: Clutch Cover Mod
« Reply #20 on: December 06, 2006, 06:12:21 AM »
The whole bike. :evil:
Iceroad champion 2006,still 2007,even 2008 without a single race!

Offline ebers17

  • Full Member
  • ***
  • Posts: 122
    • RaceShotz Photography and WNY Harescramble Forum
Re: Clutch Cover Mod
« Reply #21 on: December 06, 2006, 07:06:42 AM »
How did you do it!?
MSR, Steel MX Optics, FCR Suspension, MotoOption, Budget Racing, Bulmans Cycle Center, RaceShotz.net

Offline Danger4u2

  • Administrator
  • Hero Member
  • *****
  • Posts: 1,616
  • KX500 is Danger4u2 Returning from light speed pic.
    • KXRiders.com
Re: Clutch Cover Mod
« Reply #22 on: December 06, 2006, 07:30:24 AM »
Man that looks cool, and yes how did you do that?
KX 500 Rider

Offline doordie

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 775
  • Do or Die.....
Re: Clutch Cover Mod
« Reply #23 on: December 10, 2006, 04:29:20 AM »
Easy! :-D

Shave of stock clutch-cover and make a aluminium ring 10mm thick and then weld it on. :wink:
Drill some holes (approx 4mm) and add a gasket,done! 8-)

Now the clutch is working almost as I want it,just some more spring preload at perchadjustern and then race test for a day or so. :evil:
Iceroad champion 2006,still 2007,even 2008 without a single race!

Offline GDubb

  • Sr. Member
  • ****
  • Posts: 434
Re: Clutch Cover Mod
« Reply #24 on: December 10, 2006, 01:28:14 PM »
Thats one hell of a bike there doordie. 

Check out the clutch arm on Destry's bike....  where do I get one of those?  I imagine it is probably longer than stock already? Let me guess...  unobtainable?  Sweet looking none the less.  I shouldve been a machinist so I would know how to make my own parts like those.
Rock it 'til the wheels fall off!

"It's not what you ride... It's who you're riding for!" - www.mxrevelation.com -

hangtime

  • Guest
Re: Clutch Cover Mod
« Reply #25 on: December 10, 2006, 02:29:39 PM »
I have a lot of questions for you doordie, when will it all be ready for production?

Offline doordie

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 775
  • Do or Die.....
Re: Clutch Cover Mod
« Reply #26 on: December 11, 2006, 12:46:47 AM »
Thx for your positive words guys!

Hangtime,when I have everything ready and tested you will the first to know! :wink:
(But email me your questions if you want)
You have my serious respect with your K5-AF! :evil:

Rekluse have been very helpful to this project,even if they will not fabricate a kit for KX500.
But with ordinary tech.knowledge (and not the tumb inside your palm :-D) you can do it by yourself with my "help". 8-)

My iceroad season is comming up now and short of time as usually! :x

I says as Arnold S:
I`ll be back :lol:
Iceroad champion 2006,still 2007,even 2008 without a single race!

Offline kx666

  • Sr. Member
  • ****
  • Posts: 352
Re: Clutch Cover Mod
« Reply #27 on: December 11, 2006, 05:18:25 PM »
...I recall last I had the cover off for a fast fix at a race I was able to put the bike on it's side and flex the cover out of the way without draining oil or coolant. A foggy memory- possibly not entirely correct. Cam.


that is how i chang most clutchesd
~steve

Offline kaw rider

  • Hero Member
  • *****
  • Posts: 1,218
  • Cool your engine with water not fuel
Re: Clutch Cover Mod
« Reply #28 on: January 14, 2008, 07:38:01 PM »
i think i know where to get a clutch arm like that one. let me do some checking around.

Offline Dutch-K5 Fan

  • Hero Member
  • *****
  • Posts: 759
Re: Clutch Cover Mod
« Reply #29 on: January 15, 2008, 08:07:21 AM »
Stupid question maybe :? :? :? :?
Will a (older)250 clutch cover/carter fit on a kx500 :? :?

    Dutchie
Proud owner of a KX500AF