EFI KX's Fuel Tank Conversion How-To Question

[FL_Sharpshooter]

For those of you that are converting the fuel injected kx's, how are you converting the fuel pump inside the tank to a fuel tap for the kx500's carburetor? Or are you using an older model tank with a fuel tap already on it? Thanks.

[cmotodad]

Make a 1/4" aluminum plate, drill holes to match the old fuel pump. Use the old Oring from the fuel pump. Drill and tap a barbed fitting or install a petcock off the old tank. If you use a barbed fitting you can use a hose to a CRF250 remote petcock and put it where you want.

[FL_Sharpshooter]

Make a 1/4" aluminum plate, drill holes to match the old fuel pump. Use the old Oring from the fuel pump. Drill and tap a barbed fitting or install a petcock off the old tank. If you use a barbed fitting you can use a hose to a CRF250 remote petcock and put it where you want.

Ah, I see, very clever. Thanks for the response!

[tsr]

I have made some nice billet fuel pump block off plates if you still need one I would post some pics but having trouble posting pics I can email you some pics if needed

[FL_Sharpshooter]

I have made some nice billet fuel pump block off plates if you still need one I would post some pics but having trouble posting pics I can email you some pics if needed

Thanks for the offer, but I figured it out. I replicated the oem fuel pump plate and had a barb welded to the plate. My project has been done for some time. Some others may be interested though!

[tsr]

mine uses 2008 kx250f fuel tap I also make them to suit crf tanks

[FL_Sharpshooter]

mine uses 2008 kx250f fuel tap I also make them to suit crf tanks

That's some beautiful machine work. What are you selling them for? I'm sure some others on here may be interested.

[tsr]

They are $150au with no fuel tap