Author Topic: 1999 Kawasaki KX250 engine build for Rusty  (Read 14352 times)

0 Members and 1 Guest are viewing this topic.

Offline swordcombat

  • Full Member
  • ***
  • Posts: 80
Re: 1999 Kawasaki KX250 engine build for Rusty
« Reply #15 on: October 22, 2015, 05:33:20 AM »
Oh WOW! How did you get the engine so clean?
Also has it been vapour blasted?

And did i hear billet clutch arm? Were would i get one as mine needs replacing anyways

Offline umberto

  • Administrator
  • Hero Member
  • *****
  • Posts: 2,488
  • First Ride 02-02-19
Re: 1999 Kawasaki KX250 engine build for Rusty
« Reply #16 on: October 22, 2015, 08:26:28 AM »
Good call, that is indeed vapor blasting.  He teases us with it every so often.   :-D
Perhaps I have a dirt bike addiction?

03 KX 250/88 KX 525/2017 KX250F - Goliath
17 KX250F/04 KX250
04 KX 250 - Lunchbox's Bike
05 KX 125/144

Offline Friar-Tuck

  • Hero Member
  • *****
  • Posts: 1,827
  • \o/ Live Free or Die
Re: 1999 Kawasaki KX250 engine build for Rusty
« Reply #17 on: October 22, 2015, 10:27:15 AM »
I must have used a half gallon of acetone, twenty coffee filters and two hours cleaning the innards of last engine I put together and
it pales in comparison.....  :cry:
  Wer'e not worthy :lol:
"The Truth Has No Agenda"

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 1999 Kawasaki KX250 engine build for Rusty
« Reply #18 on: October 22, 2015, 11:09:37 AM »
Tuck, your just down the road a bit.
The next engine build you do, knock the seals and bearings out of it, get rid of the gasket material, de-grease it, and ship it to me.
I will send it back looking better then new..
Or, if your going through town, swing in with your engine cases and do it yourself..
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline Odispeebubba

  • Jr. Member
  • **
  • Posts: 17
Re: 1999 Kawasaki KX250 engine build for Rusty
« Reply #19 on: November 14, 2015, 08:44:57 AM »
i am in love.. whats something like this cost to have done? full complete reubuid like he did?

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 1999 Kawasaki KX250 engine build for Rusty
« Reply #20 on: November 15, 2015, 11:00:50 AM »
I don't remember what the total was on the parts because he bought several on eBay and elsewhere to save every penny he could.
The labor to disassemble, clean, inspect, vapor blast, and rebuild was 350.00.
And no, I couldn't give two hoots where the parts come from as long as our recommended parts list is filled  :-D
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline Odispeebubba

  • Jr. Member
  • **
  • Posts: 17
Re: 1999 Kawasaki KX250 engine build for Rusty
« Reply #21 on: November 15, 2015, 01:14:08 PM »
nice.. that was a very nice build.. that thing looks brand new

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 1999 Kawasaki KX250 engine build for Rusty
« Reply #22 on: November 15, 2015, 02:28:39 PM »
That's what we shoot for... Make it look and run better then new  8-)
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 1999 Kawasaki KX250 engine build for Rusty
« Reply #23 on: November 23, 2015, 04:22:50 PM »
Pre lubed and almost done



The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline swordcombat

  • Full Member
  • ***
  • Posts: 80
Re: 1999 Kawasaki KX250 engine build for Rusty
« Reply #24 on: November 26, 2015, 07:58:02 AM »
How do you remove the bearings you can get behind to knock out?

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 1999 Kawasaki KX250 engine build for Rusty
« Reply #25 on: November 26, 2015, 09:23:02 AM »
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline swordcombat

  • Full Member
  • ***
  • Posts: 80
Re: 1999 Kawasaki KX250 engine build for Rusty
« Reply #26 on: November 26, 2015, 07:40:04 PM »
You just need the right tool  8-)
http://www.oem-cycle.com/forum/viewtopic.php?f=39&t=64

Cheeeeeers buddy :-D
Also can you please do me a favour and move to the UK so you can get my engine
Looking like that 8-)

Offline swordcombat

  • Full Member
  • ***
  • Posts: 80
Re: 1999 Kawasaki KX250 engine build for Rusty
« Reply #27 on: November 26, 2015, 09:57:29 PM »
Also is this a similar tool? As the only one i can find in UK
Ebay item number

262162995950

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 1999 Kawasaki KX250 engine build for Rusty
« Reply #28 on: November 27, 2015, 02:58:50 AM »
Also can you please do me a favour and move to the UK so you can get my engine
Looking like that 8-)

Hey, let me give that all the thought and concern it deserves..... Wait, what were we talking about???   :-D

Also is this a similar tool? As the only one i can find in UK
Ebay item number

262162995950

Yes, that is the correct tool.
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.