« previous next »
Pages: [1]   Go Down

Author Topic: foot peg mounts  (Read 2964 times)

0 Members and 1 Guest are viewing this topic.

mikesmith

  • Guest
foot peg mounts
« on: April 04, 2003, 07:37:03 PM »
Any one use Terry Cable or Pro Circuit foot peg mounts.If so are they a lot stronger than stock.I noticed my peg was getting sloppy,had about 1/4" play were the mounts bracket had spread.
Logged

KX142

  • Guest
foot peg mounts
« Reply #1 on: April 05, 2003, 12:30:29 PM »
I bent the mount on mine and got the tery cable mount to replace it. it looks a lot stronger, but the pin isn't long enough for the cotter pin to go in so I had to drill a new hole in it. Haven't bent this one yet!
Logged

Greenrider

  • Guest
Pegs
« Reply #2 on: April 07, 2003, 02:14:31 PM »
Terry Cable has two different fixes for this problem. First is a kit with oversized pins and a drill bit. You drill out the stock peg mounts and install the oversized pins to tighten things up. Second is a bullet proof left side peg mound that is much stronger than stock, both are excellant products!
Logged
Pages: [1]   Go Up
« previous next »