Author Topic: 87 kx 500 exhaust pipe  (Read 7189 times)

0 Members and 1 Guest are viewing this topic.

Offline K5DADDY

  • Jr. Member
  • **
  • Posts: 25
Re: 87 kx 500 exhaust pipe
« Reply #15 on: April 08, 2010, 06:20:40 AM »
I have noticed on the newer pipes that there is a bracket down by the front of the engine. My 87 pipe does not have this. Does this bracket get eliminated if the newer pipe is used on the 87 or does it connect to the frame somewhere?

Offline K5DADDY

  • Jr. Member
  • **
  • Posts: 25
Re: 87 kx 500 exhaust pipe
« Reply #16 on: April 17, 2010, 01:29:19 PM »
well i finally quit screwing around and ordered a new pipe. i decided to go with the pro circuit platinum. should have it by the end of next week! thanks to all who replied on this subject!

Offline K5DADDY

  • Jr. Member
  • **
  • Posts: 25
Re: 87 kx 500 exhaust pipe
« Reply #17 on: April 22, 2010, 04:53:20 AM »
well after some problems locating the platinum pipe( talked to pro circuit and they are backordered and not far enough to do a run of 50 which is how they prefer to do it and i understand) the guy i bought the pipe from offered me a works pipe for my 87 that was left over in their wharehouse. after authenticating the pipe with pro circuit i took it and it looks fantastic on the bike. my question is does anyone have any tips on keeping it looking good. thanks!

Offline RoostDaddy

  • Sr. Member
  • ****
  • Posts: 445
Re: 87 kx 500 exhaust pipe
« Reply #18 on: April 22, 2010, 07:39:24 AM »
PJ1 clear coat paint.  Unless you want to scrub it with scotch-brite and wd40 it after every ride.
America is all about speed. Hot, nasty, bad-ass speed.

Offline K5DADDY

  • Jr. Member
  • **
  • Posts: 25
Re: 87 kx 500 exhaust pipe
« Reply #19 on: April 22, 2010, 08:01:20 AM »
thanks for the tip roost!