Author Topic: Cant start kx 100  (Read 11114 times)

0 Members and 2 Guests are viewing this topic.

Offline TabathaM

  • Jr. Member
  • **
  • Posts: 15
Cant start kx 100
« on: August 04, 2015, 04:10:09 PM »
hi everyone I got my first bike its a 2001 kx 100. guy said it needed top end re done. he bomb started it to show me it runs. brought it home, cant get it to start. took the plug out put my thumb over the hole, compression feels good. fresh fuel, coolant, oil, plug. only thing I didn't do is clean air filter. any body have similar issue. or should I just rebuild the top end for something to do.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: Cant start kx 100
« Reply #1 on: August 04, 2015, 04:35:16 PM »
Hi Tabatha and welcome to the forum.
When you say he bomb started it do you mean that he push started it?
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline TabathaM

  • Jr. Member
  • **
  • Posts: 15
Re: Cant start kx 100
« Reply #2 on: August 04, 2015, 04:55:30 PM »
ya he had to roll it down hill and throw it in gear to get it started.i tried on the biggest hill in the prairies but I couldn't get it to start.im just hoping there is a easy fix.....but its not looking like it.

Offline Rollingmenace

  • Full Member
  • ***
  • Posts: 53
Re: Cant start kx 100
« Reply #3 on: August 04, 2015, 04:56:22 PM »
My guess is too low compression ... But could be carb and reed issues as well...

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: Cant start kx 100
« Reply #4 on: August 04, 2015, 05:06:33 PM »
Yeah... Once they start loosing compression they can become very hard to start.
Feeling the compression isn't good enough.
Get a compression gauge and check it.
If you don't have a compression gauge you can usually rent one at a auto parts store.
Bring your spark plug with you so they can make sure they have the correct size.
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline alexander-vmann

  • Sr. Member
  • ****
  • Posts: 412
Re: Cant start kx 100
« Reply #5 on: August 04, 2015, 09:38:57 PM »
if the guy said it will need a new top en you probably should go for a new top end, however a fresh clean airfilter will probably help, and also you should make sure that fuel tap is turned on  :-D i have had several situations where bikes were hard to start. but it turned out to be the fuel tap in the off position
KX 500 newbie

my bike: 1993 kx500

Offline TabathaM

  • Jr. Member
  • **
  • Posts: 15
Re: Cant start kx 100
« Reply #6 on: August 05, 2015, 12:54:43 AM »
thank you very much I was planning on ordering reeds anyways. and ill call around and see if I can get my hands on a compression gauge. i bought a spark plug yesterday they helped me out with that already, wanted to be on the safe side since i new the one on the bike wasn't brand new or in the greatest shape. lol  :-D thanks already made sure the fuel tap was on lol ive seen lots of people do that one too lol.

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: Cant start kx 100
« Reply #7 on: August 05, 2015, 07:24:48 AM »
yup...I myself would take the motor right outa the frame and put on the bench, then pull the head and cylinder right off, it doesn't take long to do at all...and you'll know right away if it's in need of a top end...and from the sounds of it, it does.
 Then you can go through everything, and clean all the KIPS components...and be sure everything looks good and that nothing needs replacing.
Who knows...maybe you'll get lucky, and just need to re-ring it...but that's a long reach.
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline umberto

  • Administrator
  • Hero Member
  • *****
  • Posts: 2,488
  • First Ride 02-02-19
Re: Cant start kx 100
« Reply #8 on: August 05, 2015, 07:40:42 AM »
I would recommend buying a service manual or Clymer manual.  They are readily available on eBay and are really great references.  Also, YouTube is a great reference as well.  Good luck!



http://www.ebay.com/itm/Clymer-Kawasaki-KX80-KX85-KX100-M448-Shop-Service-Repair-Manual-New-/261993770198?hash=item3d000bacd6&vxp=mtr
Perhaps I have a dirt bike addiction?

03 KX 250/88 KX 525/2017 KX250F - Goliath
17 KX250F/04 KX250
04 KX 250 - Lunchbox's Bike
05 KX 125/144

Offline TabathaM

  • Jr. Member
  • **
  • Posts: 15
Re: Cant start kx 100
« Reply #9 on: August 05, 2015, 03:11:27 PM »
thank you so much ill take her apart tomorrow and take a look

Offline TabathaM

  • Jr. Member
  • **
  • Posts: 15
Re: Cant start kx 100
« Reply #10 on: August 08, 2015, 02:30:13 AM »
so I am rebuilding the top end period. thanks everyone I appreciate the help

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: Cant start kx 100
« Reply #11 on: August 08, 2015, 02:32:22 AM »
cool...keep us posted...don't be afraid to ask any questions.
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline TabathaM

  • Jr. Member
  • **
  • Posts: 15
Re: Cant start kx 100
« Reply #12 on: August 08, 2015, 12:37:18 PM »
im just wondering before I order the kit how do I know what size of top end/ piston rebuild kit I noticed that there's 52.5 mm, 53 mm and 54.5 mm..... im pretty sure its stock noting fancy or new...

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: Cant start kx 100
« Reply #13 on: August 08, 2015, 12:58:52 PM »
whoever you chose to do the replating on the cylinder, just tell them you'll be needing a piston kit to go with it....most replating places sell piston kits, so you'll be good to go.
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline TabathaM

  • Jr. Member
  • **
  • Posts: 15
Re: Cant start kx 100
« Reply #14 on: August 08, 2015, 02:04:00 PM »
okay awesome thanks  :-)