« previous next »
Pages: [1] 2   Go Down

Author Topic: In search of the obsolete valve.  (Read 12786 times)

0 Members and 1 Guest are viewing this topic.

Offline Jmoore6.7

  • Newbie
  • *
  • Posts: 5
In search of the obsolete valve.
« on: June 09, 2015, 01:18:14 PM »
Howdy, I'm sure this is all for nothing but here we go. Does anyone have a source for the RH sub exhaust valve for 94 250? I'm sure not I keep getting the typical run around and email returns for "discontinued" how about 12005-1243? The 96 cylinder valve, I could make it work but can't find those either. Anyone got any good ideas??? It's the last piece I need....
Logged

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: In search of the obsolete valve.
« Reply #1 on: June 09, 2015, 01:36:01 PM »
I had a set on eBay that sold in about 3 hours.
I like that 94 cylinder..
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline Jmoore6.7

  • Newbie
  • *
  • Posts: 5
Re: In search of the obsolete valve.
« Reply #2 on: June 09, 2015, 01:38:37 PM »
Well if you happen to have another???? 
Logged

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: In search of the obsolete valve.
« Reply #3 on: June 09, 2015, 01:41:08 PM »
I don't right now but you never know what will come in the door next..



I'll let you know if I run into any
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline 81cr450

  • Hero Member
  • *****
  • Posts: 887
Re: In search of the obsolete valve.
« Reply #4 on: June 09, 2015, 03:08:25 PM »
I've heard from a few kx fiends , "buy a loaded cylinder, then resell the unloaded cylinder"  :wink:
Logged
if I only had a pair, I could actually ride this thing

& to the people I like  FYYFF

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: In search of the obsolete valve.
« Reply #5 on: June 09, 2015, 03:40:30 PM »
Sssshhhhhh......  :-P
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline Jmoore6.7

  • Newbie
  • *
  • Posts: 5
Re: In search of the obsolete valve.
« Reply #6 on: June 09, 2015, 09:45:15 PM »
Yeah that's gonna have to work. Just hope the loaded cylinder has a seller who knows what they looking at. It would be my luck to find another one with broken valve.
Logged

Offline LukeG

  • Full Member
  • ***
  • Posts: 166
Re: In search of the obsolete valve.
« Reply #7 on: June 10, 2015, 09:25:35 AM »
The 99-04 valves are a smaller diameter and I have been toying with the idea of sleeving one up to suit a 93 cylinder. Although I also have a 99 cylinder so I should just use it. If I ever try it I will post the results.
Logged
1990 KX250 - Wanna be road racer!
2007 DRZ 462 Motard

Offline Jmoore6.7

  • Newbie
  • *
  • Posts: 5
Re: In search of the obsolete valve.
« Reply #8 on: June 10, 2015, 12:15:00 PM »
My left side is good, it's the right one I found broke in half. I was thinking about making some kind of mood and casting new ones. I don't have any experience but I figure if I can cast bullets...... It would be a bad thing to fall apart though
Logged

Offline Flattracker

  • Jr. Member
  • **
  • Posts: 14
Re: In search of the obsolete valve.
« Reply #9 on: June 11, 2015, 01:32:49 AM »
What material is the valve made of? Mild steel? Wouldn't it be possible to just tig weld it together.
Logged

Offline Jmoore6.7

  • Newbie
  • *
  • Posts: 5
Re: In search of the obsolete valve.
« Reply #10 on: June 11, 2015, 08:17:26 AM »
Seems to be aluminum. I'm missing top half. Previous owner apparently couldn't find one either so he put half of it back in cylinder... Dumb. And of course didnt see until tore into top end.
Logged

Offline Hawgranch

  • Newbie
  • *
  • Posts: 5
Re: In search of the obsolete valve.
« Reply #11 on: July 21, 2015, 11:40:41 AM »
I just so happen to have what your after! I can send pics tomorrow if you want. They need to be cleaned but have no visible problems
Logged

Offline LukeG

  • Full Member
  • ***
  • Posts: 166
Re: In search of the obsolete valve.
« Reply #12 on: July 21, 2015, 11:48:30 AM »
I will put my hand up for them if Jmoore6.7 doesn't want them.
Logged
1990 KX250 - Wanna be road racer!
2007 DRZ 462 Motard

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: In search of the obsolete valve.
« Reply #13 on: July 21, 2015, 12:41:57 PM »
Or, if your desperate... ride without them....
You'll loose some low end to mid-range but you will be riding..
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline Hawgranch

  • Newbie
  • *
  • Posts: 5
Re: In search of the obsolete valve.
« Reply #14 on: July 22, 2015, 06:47:51 AM »
Who ever wants mine pm me with your # and I'll send some pics, then make me a reasonable offer.
Logged
Pages: [1] 2   Go Up
« previous next »